Team-BHP
(
https://www.team-bhp.com/forum/)
Quote:
Originally Posted by deutscheafrikar
(Post 2886220)
Ahaa a moris minor...nice car, my dad had one in the late 60's early 70's. I'm sure I have 8 valves in one of the steel trunks in my garage. He had overhauled the engine back then and this must have been surplus.
|
Hi Deutscheafrikar,
I recently acquired a morris minor 1952, you can read more about it here
http://www.team-bhp.com/forum/post-w...ion-dream.html
Do please let me know if you have any spares that you would like to dispose off. It would be very helpful, as of now i am doing some reading and am slowly dismantling the car little by little, i hope to have a lot more time in the future to do up this car myself or if i am unable to do so, then get it done :).
regards,
Srinand.
Quote:
Originally Posted by IndrojitSircar
(Post 2885814)
I am looking for a Solex 30PAAI single barrel down draught carburetor. If you have it in stock i would love to have it. It was common on some of the Mercedes 219 & 220S.
:OTPlease also beware of people on team-bhp claiming to buy bulk parts, making committments and then not paying up on time. Have faced this a number of times.
Regards
Indrojit Sircar
|
Afraid, I do not have the carb you require.
Thank you for your advice, I shall certainly be careful in dealing with such buyers. agree:
Quote:
Originally Posted by Collector
(Post 2885538)
That is the engine from the HANSEAT tempo the 3 wheeler front wheel drive transport vehicle that was the predecessor of the Matador.
You can still find many of these vehicles in rural Maharashtra though they have been desielised.
If the engine is for sale I am interested to take itlol:
|
Hanseat was using the DKW designed engine, it is an original DKW design
Original headlights of w140 500 are available for sale
The owner recently replaced ones on his car with xenons
Kindly PM for details
Regards,
Vikram
Hello all,Just recently last week,had found an access to a new unused Carburetor for Standard Herald,Solex India Make 28ZIC,the box says that its' application is Standard ten and Standard Pennant.Seems to be fit for Standard Herald.I hope this can be useful to few Herald enthusiasts here.PM me here if any interest.
Does any one have the Hindustan Landmaster Workshop Manuel.
Thanks & Regards,
Jagadeesh
Hi looking for original split rims for my ford GPW jeep.
Quote:
Originally Posted by piyush shah
(Post 2887951)
Hello all,Just recently last week,had found an access to a new unused Carburetor for Standard Herald,Solex India Make 28ZIC,the box says that its' application is Standard ten and Standard Pennant.Seems to be fit for Standard Herald.I hope this can be useful to few Herald enthusiasts here.PM me here if any interest.
|
Hi Mr Shah, I am interested in your carb for my Super ten. Pls contact me on
planter472002@yahoo.co.in or on phone 09344833274clap:
Quote:
Originally Posted by wasif
(Post 2887120)
Hanseat was using the DKW designed engine, it is an original DKW design
|
It may well be a DKW, engine but I am certain due to the gear shift mounting and the final drive sprocket that it comes from a Hanseat. The engines were imported as parts [fully knocked down kits] and assembled here in India itself.
A friend is looking for the following part, in his own words:
<Quote> I need your help to find a tail lamp for my Grandfather's 1948 Hillman Minx. It is a single piece lamp, which is fixed over the registration plate (picture attached - from the Internet) <Unquote>
The person to be contacted, and his contact details are:
Mr. Rajeev Chandra, Ph: +919811709343, Email:
eagleageinternational@yahoo.com
Kindly note, that I have
NO commercial, or any other, interest in this episode whatsoever. Sellers may contact the buyer directly; please do NOT write to me!
I have some NOS Lucas Regulator Covers, compatible to be fitted on lucas TVS or even PMP regulator as well.(with Box),
some NOS Lucas Cable Operated Starter Switches(without Box),
and one NOS Prestolite Cable Operated Starter Switch(with Box).
I have a pair of Bumper Guards to be Identified.
If anyone is interested in the above items please PM me.
Help with identifying the Bumper guards would also be appreciated.
regards
-invinci
Quote:
Originally Posted by invinci I have some NOS Lucas Regulator Covers, compatible to be fitted on lucas TVS or even PMP regulator as well.(with Box),
-invinci
|
Is that a bush radio at the back in the first picture. Can you help me source one. Regards
Contact Hillman club or salvage yards for Hillman in England.You will not find anything in India
Quote:
Originally Posted by the mole
(Post 2911258)
Is that a bush radio at the back in the first picture. Can you help me source one. Regards
|
Yes, I will let you know if i find another one.
regards
-invinci
Quote:
Originally Posted by invinci
(Post 2911047)
I have a pair of Bumper Guards to be Identified.
Help with identifying the Bumper guards would also be appreciated.
|
If I were to hazard a guess I'd say most probably a Rootes group vehicle.
The bumper guards look a lot like those used on Hillman Imp / Minx / super Minx in the late 60s.
However, all Rootes bumper guards that I have seen have a flatter rubber impact strip. This one is more bulbous much like the one that came on MGBs.
So I'm not a hundred percent sure.
| All times are GMT +5.5. The time now is 13:04. | |
