[dpn248]

Looking for front windscreen for WOLSELEY4/44, 15/50,OR MG ZA.
Also tail & crown pinion fits MG ZA, Wolseley 15/50, Austin A50 & A55, as 4.875 to 1.
Dipankar Sen

[trammway]

Could someone identify this following parts (meter and warm gear driven wiper motor). The wiper seems to be warm or vacuum driven one.

[ajay99]

saw 2 VW beetle /bus parts in a shop here.
1.NOS BOSCH ignition coil bracket
2.NOS Energit brake liners(rear wheels) 4 pieces (made in germany) no packing,part NO-111-698-075.

[Mohammed4rmhyd]

[quote=trammway;2234294]Could someone identify this following parts (meter and warm gear driven wiper motor). The wiper seems to be warm or vacuum driven one.

Hi

To me the Meter and cosole look like from a 1951 FORD CONSUL MARK1.Mebbe it was shared for the same period Zephyr and Zodiac too.

Mohammed

[girishpv]

Can anyone help me to find just "ONE" of this 3 stud, 16" wire wheel ?

[harit]

Originally Posted by trammway

Could someone identify this following parts (meter and warm gear driven wiper motor). The wiper seems to be warm or vacuum driven one.

This is a wiper motor that works on air or vacuum, most likely made by Trico of USA. These were seen in Caddilacs, I believe also in some Jeeps.
They still turn up unused.

Cheers harit

[anjan_c2007]

Originally Posted by trammway

Could someone identify this following parts (meter and warm gear driven wiper motor). The wiper seems to be warm or vacuum driven one.

This one is a car's. The Willys LHD jeeps had such vacuum wipers.The right wiper was manually operated and the driver's side (left) had the motor mounted in a black housing, on the top left side. The vacuum tube used to be fixed to the motor.I had one 1964 LHD Willys for use for sometime with me and also remember its Carter fuel pump and carburettor.

[trammway]

Originally Posted by harit

This is a wiper motor that works on air or vacuum, most likely made by Trico of USA. These were seen in Caddilacs, I believe also in some Jeeps.
They still turn up unused.

Cheers harit

Originally Posted by anjan_c2007

This one is a car's. The Willys LHD jeeps had such vacuum wipers.The right wiper was manually operated and the driver's side (left) had the motor mounted in a black housing, on the top left side. The vacuum tube used to be fixed to the motor.I had one 1964 LHD Willys for use for sometime with me and also remember its Carter fuel pump and carburettor.

I'm sure too, the Willys old jeeps had vacuum operated wiper motors, but this one not seems to be the Willys type.

The Willys ones had a single viper blade per motor, but if you look at the picture I have posted shows that this single motor operates two viper blades with the relay and end of each relay has viper blade arm milling. I think this would have been used in some small car with a very narrow windscreen. Which one is that ?

[IndrojitSircar]

There is an original Daimler Benz gasket sent for sale in a shop here. The gasket set is for the following 6 cylinder cars -

1).219
2).220A
3).220B
4).220S
5).220SB
6).230
7).230S

It includes the valve cover gasket and also the carb packings.

for further inquires you can contact me. My email id is - indrojit.sircar@gmail.com for people who are just readers and for members, either email or pm.

Regards

[IndrojitSircar]

Originally Posted by IndrojitSircar

There is an original Daimler Benz gasket sent for sale in a shop here. The gasket set is for the following 6 cylinder cars -

1).219
2).220A
3).220B
4).220S
5).220SB
6).230
7).230S

It includes the valve cover gasket and also the carb packings.

for further inquires you can contact me. My email id is - indrojit.sircar@gmail.com for people who are just readers and for members, either email or pm.

Regards

Here is a picture of the same for reference.

[ajay99]

Found a set of used but working front and wheel cylinders(gERMAN) for 65-67 model beetles in a scrap shop here.asking Rs.600 for the full set.

[asdfvinay]

Hi,
Can someone please help me source the following parts for my cars.

1955 Land Master
Tail Lights-Either lens or Complete Assembly(Both sides)-High priority as my car doesnt have them.
Front Parking Lights-Glass or plastic-anything will do-The car has these but need new set as I'm planning restoration very soon.
Dash board switches
Original Steering wheel along with horn switch(complete assembly)
The steel beedings on both left and right sides

1962 Ambassador Mark I
Tail Lights lenses(I need these for my Mark II also)
Front parking lights

Also need wide white wall tyres, are these tyres still in production by any chance?

Thanks for all the help.
-Vinay

[ajay99]

Originally Posted by asdfvinay

Hi,
Can someone please help me source the following parts for my cars.

1955 Land Master
Tail Lights-Either lens or Complete Assembly(Both sides)-High priority as my car doesnt have them.
Front Parking Lights-Glass or plastic-anything will do-The car has these but need new set as I'm planning restoration very soon.
Dash board switches
Original Steering wheel along with horn switch(complete assembly)
The steel beedings on both left and right sides

1962 Ambassador Mark I
Tail Lights lenses(I need these for my Mark II also)
Front parking lights

Also need wide white wall tyres, are these tyres still in production by any chance?

Thanks for all the help.
-Vinay

many of these items are still available,including the white wall tyres

[mbz180]

Hello,

I am on the lookout for a vintage Smiths rev counter, exactly as the one pictured for reference. These were used for sports cars of the mid-20s to mid 30s (British). Please let me know if any of you have one of these for sale.

Best Regards
Prithvi

[amit_m16]

Hi,
I Have a 1947 vauxhall 14 which I am currently restoring. I need the contact details of spare suppliers for this particular car.Particularly the Dash gauge.Any other info on the car is most welcome!

Regards/Amit