Vintage & Classic Car Parts

IndrojitSircar · 3rd August 2009, 15:02

Hi there is one car but the car is almost under the ground the body has melted completely.The engine should be in an ok condition water may have gone into the cylinders not sure about that.

speedy · 3rd August 2009, 20:44

Quote:

Originally Posted by IndrojitSircar

Hi there is one car but the car is almost under the ground the body has melted completely.The engine should be in an ok condition water may have gone into the cylinders not sure about that.

If you could PM me the adress, i would have someone look into it. I have a car but the engine was dieselised so want to replace it. Thank you for your lead.

manishalive · 4th August 2009, 13:50

Website of a manufacturer in Chandigarh (JCBL body builders for busses and manufacturers of Cerita Busses)

Aluminium foils Products appliances foil , pharmacy foils , cable foil of JCBL manufacturer of Buses, Heavy Commercial Vehicles, Airport Buses, Aluminium Coils, Aluminium Die Castings, Brakes Drum

Was not aware they dealt into classic car parts also.

Srivathsa_Satya · 5th August 2009, 09:32

I am looking for Champion Spark Plug N9Y for my 1969 Hillman Minx in Bangalore. Help !!!

PAVAN KADAM · 5th August 2009, 12:19

Quote:

Originally Posted by Srivathsa_Satya

I am looking for Champion Spark Plug N9Y for my 1969 Hillman Minx in Bangalore. Help !!!

Please visit Jadsons Automobiles on JC Road,

I got 4 plugs for the MG recently, those are Made in England plugs from champion.

Contact Mr Kripakar Rao on == 22222777, 26708777

siddartha · 5th August 2009, 17:08

Quote:

Originally Posted by PAVAN KADAM

Please visit Jadsons Automobiles on JC Road,

I got 4 plugs for the MG recently, those are Made in England plugs from champion.

Contact Mr Kripakar Rao on == 22222777, 26708777

the problem with jadsons is that mr kriparkar wont part with some the rare stuff if you dont know him well enough.

abhimanyurana · 6th August 2009, 05:36

A tree fell on my just as the restoration was complete.
A special gift for whoever finds me the windshield.
Am also looking for the rear tail light set

the mole · 6th August 2009, 10:03

It will take a lot to find an Impala windshield, you will have to import it from the US. My friend just did the same for his Bel Air

imperial.s.a · 9th August 2009, 18:49

Guys anybody whose aware of an sixcyclinder S O H C petrol Mercedes engine can p m me

Star man · 10th August 2009, 15:28

Quote:

Originally Posted by imperial.s.a

Guys anybody whose aware of an sixcyclinder S O H C petrol Mercedes engine can p m me

Which model six cylinder are you looking for,the carburetor version (M180) or injected (M127) ? or 3-0-0 version the M189?
email me at briskiwi at bigpond dot com dot au if you want to ship from Australia.

the mole · 10th August 2009, 16:28

Quote:

Originally Posted by Star man

Which model six cylinder are you looking for,the carburetor version (M180) or injected (M127) ? or 3-0-0 version the M189?
email me at briskiwi at bigpond dot com dot au if you want to ship from Australia.

Hi starman what are the going prices for good W107's in Australia.

manishalive · 10th August 2009, 18:31

I am trying to model few logos in CAD for my fiat to have it CNC Machined.

Attached below is the millecento logo with 3 iterations, drawn from the image posted elsewere in the forum. Need your views on which one is near to original.

IndrojitSircar · 10th August 2009, 20:33

Quote:

Originally Posted by manishalive

I am trying to model few logos in CAD for my fiat to have it CNC Machined.

Attached below is the millecento logo with 3 iterations, drawn from the image posted elsewere in the forum. Need your views on which one is near to original.

Attachment 172399

Its the second last one according to me.

the mole · 11th August 2009, 08:37

Quote:

Originally Posted by manishalive

I am trying to model few logos in CAD for my fiat to have it CNC Machined.

Attached below is the millecento logo with 3 iterations, drawn from the image posted elsewere in the forum. Need your views on which one is near to original.

Attachment 172399

The "i" is a little off should be wider but otherwise Its agood attempt Barvo

. No would you know anyone who can make dome stickers. I and I assume many Bhpians lack the dome sticker which goes around the ignition of a 57 elegant. I am attaching pics of the same. I also imported the image into cad an scaled it exactly to match the circumference of the ignition starter switch. I can send you the cad file if you have someone who can make it.

manishalive · 11th August 2009, 09:49

Quote:

Originally Posted by the mole

I also imported the image into cad an scaled it exactly to match the circumference of the ignition starter switch. I can send you the cad file if you have someone who can make it.

Amol,

Have you digitised the logo or you r looking for some one to digitise it?? I might help

.

Secondly that dome sticker is for round back fiat's. The attached dome sticker is for Select, was that available in Indian fiat's

3rd August 2009, 15:02	#151
IndrojitSircar Senior - BHPian Join Date: Apr 2009 Location: Kolkata/Delhi Posts: 2,318 Thanked: 977 Times	Hi there is one car but the car is almost under the ground the body has melted completely.The engine should be in an ok condition water may have gone into the cylinders not sure about that.
	() Thanks

4th August 2009, 13:50	#153
manishalive Senior - BHPian Join Date: Apr 2009 Location: Bangalore Posts: 2,523 Thanked: 1,098 Times	Website of a manufacturer in Chandigarh (JCBL body builders for busses and manufacturers of Cerita Busses) Aluminium foils Products appliances foil , pharmacy foils , cable foil of JCBL manufacturer of Buses, Heavy Commercial Vehicles, Airport Buses, Aluminium Coils, Aluminium Die Castings, Brakes Drum Was not aware they dealt into classic car parts also.
	() Thanks

5th August 2009, 09:32	#154
Srivathsa_Satya BHPian Join Date: Mar 2009 Location: BLR - VU3BLR Posts: 82 Thanked: 7 Times View My Garage	Spark Plug Equivalent I am looking for Champion Spark Plug N9Y for my 1969 Hillman Minx in Bangalore. Help !!! Last edited by Jaggu : 5th August 2009 at 10:08. Reason: Please use Search and post in an already existing thread, please. Thanks
	() Thanks

6th August 2009, 05:36	#157
abhimanyurana Newbie Join Date: Jun 2008 Location: Delhi Posts: 7 Thanked: 5 Times	1969 Chevy Impala windshield A tree fell on my just as the restoration was complete. A special gift for whoever finds me the windshield. Am also looking for the rear tail light set Last edited by Rehaan : 6th August 2009 at 16:16. Reason: Please see Rule #11. Thanks.
	() Thanks

6th August 2009, 10:03	#158
the mole Senior - BHPian Join Date: Nov 2006 Location: Mumbai Posts: 2,190 Thanked: 827 Times View My Garage	It will take a lot to find an Impala windshield, you will have to import it from the US. My friend just did the same for his Bel Air Last edited by Rehaan : 6th August 2009 at 16:17. Reason: Quoted post edited.
	() Thanks

9th August 2009, 18:49	#159
imperial.s.a BHPian Join Date: Nov 2008 Location: bangalore Posts: 260 Thanked: 35 Times	Guys anybody whose aware of an sixcyclinder S O H C petrol Mercedes engine can p m me
	() Thanks

10th August 2009, 18:31	#162
manishalive Senior - BHPian Join Date: Apr 2009 Location: Bangalore Posts: 2,523 Thanked: 1,098 Times	I am trying to model few logos in CAD for my fiat to have it CNC Machined. Attached below is the millecento logo with 3 iterations, drawn from the image posted elsewere in the forum. Need your views on which one is near to original.
	() Thanks