[kpzen]

Originally Posted by vivekgk

Does the TUV300 use the same 114.3 x 5 PCD as the new Scorpio, Brezza, Duster etc? Or is it still on the 160 x 5 like the older Mahindra models?

TUV300 wheel PCD is 114.3 x5 bolts.
PCD is same as Brezza and Duster. However, the offset may not be in the same range.

[raja_ys]

I have a Maruti Etseem car alloys lying idle, wold like to know whether they will fit a Chevrolet spark LT 2013 model?

[Sinner666]

Hi,

Can I fit the Ciaz 15" steel rims on my Swift Vdi (2013)?

Will it be the same specs as the alloys on Swift Zxi/Zdi (except that these aren't alloys, and are steel wheels)?

My swift is up for tire replacement, and was thinking if I could upgrade to 15".

TIA

[asitkde]

Does anybody know the PCD of new (Feb 2017 onwards) VW Polo GT TSI with 16" wheels and 5 bolts?

I believe, the older version with 185/60/R15 tyres had a PCD of 100 mm with 5 bolts. The question is, has it changed with the new version with 16" rims? They still use 5 bolts.

[shibujp]

What is the PCD for the Kwid which has 3 hole alloys

[ishlinea7260]

Any idea regarding 2014 Vw Jetta PCD?

[torquehead]

Getting an option to swap the OEM alloys(new design, May'17 mfg) on my S-Cross with the machined-finish alloys sold for Brezza.

Anyone who can share info about the PCD, offset and the width of both these alloys?

[kpzen]

Originally Posted by asitkde

Does anybody know the PCD of new (Feb 2017 onwards) VW Polo GT TSI with 16" wheels and 5 bolts?
.

2017 polo comes with 5 hole 100 PCD wheels

Originally Posted by shibujp

What is the PCD for the Kwid which has 3 hole alloys

3 hole 100 PCD

[vivekgk]

Can the Nano take the wheels from the kwid/redigo? All three have 3x100 PCD right? Does any company make 155/60r13 or 165/55R13 tyres in India? Where can I get them?

[reignofchaos]

Any idea what cars use 5x108 pattern in India. Planning to get rid of my stock v40 alloys but not sure who will pick them up.

[kpzen]

Originally Posted by reignofchaos

Any idea what cars use 5x108 pattern in India. Planning to get rid of my stock v40 alloys but not sure who will pick them up.

Ford Mondeo (old)
Jaguar XE/XF
Freelander2

[pedrolourenco]

I'm looking for a set of 13" wheels with 114.3 PCD 4 holes either steel or alloy. Which all cars came with this size. I know Zen and Esteem did. Any other cars?

[COMMUTER]

I am planning to put 15 inch steel rims in my New Figo 1.5 D . What OEM rims can I scout for? What size should I specify if I were to order a set? Tell me the list of aspect that should match other than Rim Diameter, Rim width, Offset, no of holes and pcd ,if any. Please tell me the alloy specification of Figo S .

[kpzen]

Originally Posted by pedrolourenco

I'm looking for a set of 13" wheels with 114.3 PCD 4 holes either steel or alloy. Which all cars came with this size. I know Zen and Esteem did. Any other cars?

Daewoo Matiz came with 114.3 PCD wheels.

Originally Posted by COMMUTER

I am planning to put 15 inch steel rims in my New Figo 1.5 D . What OEM rims can I scout for? What size should I specify if I were to order a set? Tell me the list of aspect that should match other than Rim Diameter, Rim width, Offset, no of holes and pcd ,if any. Please tell me the alloy specification of Figo S .

Ford Fiesta 15" rims & Figo S wheels share the same specs.
But, I'm not sure which variant of Fiesta came with steel rims.

[pedrolourenco]

Originally Posted by kpzen

Daewoo Matiz came with 114.3 PCD wheels.

Does it mean that the Chevrolet Spark also came with 114.3 PCD Wheels?