[Dr.Awesomeness]

This was my first bike which i was gifted by my mom. It was a classic 150 Pulsar 2003 model. I tried my hand with fair amount of mods. The bike was silver when i bought it, changed it to orange, again changed it to skyblue, didnt know what i was doing and i am not proud of all the mods i had done to bike. I literally killed the bike with all the mods and finally sold it.

MODS: please bear with me, i did not have the original pics with me, so had to take it down from my profile from bikepics.com, i guess it is fine.

[regnex]

Here is a friends RTR customized with paintjob, headlight and engine/exhaust.

[abhayshanu]

I want to show my bike's transformation from stock to moddified.
The pics can do all the talking.


The bike on the First Night. Got it at around 6-7 pm and this was clicked at 8pm.


This was a few days later with Pirelli Sport Demons tyres installed.


This is just a few days after I got my bike Joel'ed.


This is just after my First Race, and my bike in Naked mode.


This is when I decided to remove the fairing and convert my bike to a compact/naked bike.


Installed Green Cotton Air Filter and had jetting done.


Shifted to Cosworth and had jetting done again.


Got my exhaust rechromed and bike into a mono suspension setup. This is how it looks right now.


List of mods :-
Porting and Polishing of head.
Free Flow Exhaust
Mono Cross Suspension from FZ
110/70/R17 and 140/70/R17 Pirelli Sport Demon Tyres.
Cosworth Air Filter.

These are the major things, there are many small small things I keep on doing to the bike every now and then.

[desideep]

Originally Posted by abhayshanu

I want to show my bike's transformation from stock to moddified.
The pics can do all the talking.

Attachment 613383
The bike on the First Night. Got it at around 6-7 pm and this was clicked at 8pm.

Attachment 613384
This was a few days later with Pirelli Sport Demons tyres installed.

Attachment 613385
This is just a few days after I got my bike Joel'ed.

Attachment 613386
This is just after my First Race, and my bike in Naked mode.

Attachment 613387
This is when I decided to remove the fairing and convert my bike to a compact/naked bike.

Attachment 613388
Installed Green Cotton Air Filter and had jetting done.

Attachment 613389
Shifted to Cosworth and had jetting done again.

Attachment 613390
Got my exhaust rechromed and bike into a mono suspension setup. This is how it looks right now.


List of mods :-
Porting and Polishing of head.
Free Flow Exhaust
Mono Cross Suspension from FZ
110/70/R17 and 140/70/R17 Pirelli Sport Demon Tyres.
Cosworth Air Filter.

These are the major things, there are many small small things I keep on doing to the bike every now and then.

Nicely done up bike and i would like to know more about the Mono suspension, are facing problems with your chain after that?

[abhayshanu]

Originally Posted by desideep

Nicely done up bike and i would like to know more about the Mono suspension, are facing problems with your chain after that?

The mono is harder(set on hardest setting) and is just perfect. The bike is much more flickable and feels much more lighter and agile. There were no problems with the chain as this is located in the dead center.

[zacs]

My Pimped up RXG 135

[desideep]

My friend owns this RD,
This bike has more than 70 BHP of power.
Does 3 digit speeds in very small gears

[aqualeo2040]

Nice looking ride deep.
Definitely a fun wheelie machine

What were the internal mods to the bike other than the chambers?

Although a part of me doubts that 70bhp figure, it would be good to know the engine mods on this ride, specially with the new rear swingarms!

[desideep]

Owner gave me this link for your viewing pleasure,

[COLOR=#800080]http://www.facebook.com/media/set/?set=a.10150734830925507.708125.802880506&type=3[/COLOR]


the album has a Curve which is for only one barrel and it is not in proper tune yet

[abhayshanu]

Originally Posted by desideep

My friend owns this RD,
This bike has more than 70 BHP of power.
Does 3 digit speeds in very small gears

That tejinder's RD. AFAIK it placed 1st in the hill climb race. Race to the Clouds

[desideep]

Thats rite it is Tejinders RD.

and @ AQUALEO2040

the list of works done and stuff is bellow.


Dialed in compression and squished O ring heads by SCR
Stage 2 porting by SCR
Custom Wossner pistons with ceramic coated head and MoS2 skirt
Custom small end bearings
Custom setup connecting rods
Peak coated custom TZ big end bearings
Lightened and balanced crankshaft
Rebored and honed by SCR
Upgraded crank main bearings with O rings
Upgraded transmission to make sure it shifts at 11,500+ RPM
All bearings upgraded and replaced - including the one under the first gear wheel
Every circlip replaced
Brand new oil seals
Brand new neutral switch with o ring
Brand new shift shaft
Custom Barnett clutch kit
Brand new upgraded clutch assembly including hub, boss, bell and pressure plate, clutch bell nut
Brand new primary drive gear
Brand new sprocket nut
Vforce 3 reeds
Polyurethane intake manifolds for carbs
Banshee aluminium U tube
Mikuni TM34 SS carburetors
UNI air filter
Ignitech programmable ignition
Gasket set
NGK Plug caps
520 conversion kit with 7075T6 billet aluminum rear sprocket
NGK BP8HS - 20 pieces
NGK BP9HS - 10 pieces
Engine bolt kit
Tygon fuel lines
High flow fuel filters
High flow fuel taps

[motorpsycho]

@ DesiDeep,

What about the exhaust, are they too from SCR( Same as Scott Clough?) They look pretty exotic. Were they fabricated in India?

Thanks

MP

[arrpiem]

@ DesiDeep,

Is this running on the RDD CDI kit?

The filters sure look like they've come from Ron

[yamdoot]

Hey there guys. This is my RX turned into a dual purpose on-off roader. Some cosmetic work still incomplete. It 'll have a rear mudguard, a half chain cover, and some paint work.
The front end has been swapped with an imported on-off road suspension and complete wheel. New meter plate has been fabricated to accommodate the RXZ meters. Please feel free to ask more details. Hope you all like it.

[Dr.Awesomeness]

Originally Posted by yamdoot

Hey there guys. This is my RX turned into a dual purpose on-off roader. Some cosmetic work still incomplete. It 'll have a rear mudguard, a half chain cover, and some paint work.
The front end has been swapped with an imported on-off road suspension and complete wheel. New meter plate has been fabricated to accommodate the RXZ meters. Please feel free to ask more details. Hope you all like it.

Nice mod friend, lose the standard exhaust and go for a full blown expansion chamber, i would look good with the overall theme of the bike and when given the stick will sound and go like a proper 'blue smoker'.