All about Two stroke (2T) oils

chiragh_bir · 10th May 2009, 10:32

FINALLY !!

I got Petronas 5000 2T Booze for my RX

Will pour it soon, but it smells good , not like regular oils which smells damn bad especially Castrol 2T .

What is correct ratio for Petrol & 2T ? I use 25ml for 1 Lt petrol!

Raccoon · 10th May 2009, 12:08

^^^Great, you like the smell, hope your RX likes the taste.

How much did it cost, btw? Does it say exceeds JASO FC or just meets it? Or is it FD?

So you are using it only as a pre-mix? As I said before, generally 2% is what is mostly recommended for most 2 strokers. The 2.5% you are using should be more than adequate if not a bit in excess, considering its a fully synth oil. I'd say use 2% if your use is average and consider 2.5% if you drive hard and long.

chiragh_bir · 10th May 2009, 13:05

Quote:

Originally Posted by Raccoon

^^^Great, you like the smell, hope your RX likes the taste.

How much did it cost, btw? Does it say exceeds JASO FC or just meets it? Or is it FD?

So you are using it only as a pre-mix? As I said before, generally 2% is what is mostly recommended for most 2 strokers. The 2.5% you are using should be more than adequate if not a bit in excess, considering its a fully synth oil. I'd say use 2% if your use is average and consider 2.5% if you drive hard and long.

i don't know about if it exceeds any certification..

All i know its Synthetic 2T , has good image in market & is good for my bike.

I paid Around 300 plus shipping

straight6 · 10th May 2009, 14:25

Quote:

Originally Posted by chiragh_bir

What is correct ratio for Petrol & 2T ? I use 25ml for 1 Lt petrol!

Don't use more than 20 ml per liter.

Quote:

Originally Posted by chiragh_bir

I paid Around 300 plus shipping

300+shipping?! From where did you get it?

Raccoon · 10th May 2009, 15:07

Quote:

Originally Posted by chiragh_bir

i don't know about if it exceeds any certification..

All i know its Synthetic 2T , has good image in market & is good for my bike.

Just check on the back side of the bottle dude... the JASO rating will be mentioned!

straight6 · 10th May 2009, 15:19

Just check the first page of this thread. I have posted pictures of it.

Raccoon · 10th May 2009, 20:17

Yes I know, but if its a new stock it could have better ratings. Your pic just shows API TC and JASO FC... ie. it just meets it. Even minerals now exceed both these ratings. I'd expect better from a fully synth!!

straight6 · 11th May 2009, 06:02

We'll only know if they've improved their ratings once Chirag tells us when his can is manufactured and if it has better ratings.

"the pain" from the forum just used the Petronas 5000 I gave him a few days back in his rxz and says its made the bike smoother than before.

Any feedback from Chirag? I'm going to change to it in a few days when my bike completes 1k.

Note from the Team-BHP Support Team : Please use the "edit" button if posting within 15 minutes of the first post, instead of creating another back-to-back post

Raccoon · 12th May 2009, 15:48

Smoother compared to which oil??

Seems Chirag hasn't been around.

chiragh_bir · 12th May 2009, 16:44

sorry i was busy with ICE threads..

yes i just added Petronas with Fresh petrol ( Old has to removed cause of Junk castrol mixed)

I will check the bottle and tell the rating tomorrow . But its like 1 year old ,not many people use Synthetic 2T in north so dealer doesn't order..

I think to pick 4 bottles more so that there is no problem of stock in future

Also will buy Petros 5000 4t for my gear box !!

straight6 · 12th May 2009, 18:32

Quote:

Originally Posted by Raccoon

Smoother compared to which oil??

He was using Yamalube.

Quote:

Originally Posted by chiragh_bir

yes i just added Petronas with Fresh petrol ( Old has to removed cause of Junk castrol mixed)

Do you find the bike smoother?

chiragh_bir · 13th May 2009, 14:28

Quote:

Originally Posted by straight6

He was using Yamalube.

Do you find the bike smoother?

i will ride my bike today !!

straight6 · 14th May 2009, 00:10

Any feedback Chirag?

Ravveendrra · 14th May 2009, 01:50

I was searching this thread for info on the detergent content of the oils. I am looking for a 2T oil with high (highest) detergent to clean and clear out deposits.

Please help guys.

Cheers and thanks in advance,

chiragh_bir · 14th May 2009, 12:10

Quote:

Originally Posted by straight6

Any feedback Chirag?

Not getting time to ride it man am too eager to ride it !!

Today eve will ride it no matter what !!

10th May 2009, 10:32	#121
chiragh_bir Senior - BHPian Join Date: Dec 2004 Location: In front of you :P Posts: 1,123 Thanked: 74 Times View My Garage	FINALLY !! I got Petronas 5000 2T Booze for my RX Will pour it soon, but it smells good , not like regular oils which smells damn bad especially Castrol 2T . What is correct ratio for Petrol & 2T ? I use 25ml for 1 Lt petrol!
	() Thanks

10th May 2009, 12:08	#122
Raccoon Senior - BHPian Join Date: Jan 2008 Location: Poona Posts: 1,851 Thanked: 116 Times	^^^Great, you like the smell, hope your RX likes the taste. How much did it cost, btw? Does it say exceeds JASO FC or just meets it? Or is it FD? So you are using it only as a pre-mix? As I said before, generally 2% is what is mostly recommended for most 2 strokers. The 2.5% you are using should be more than adequate if not a bit in excess, considering its a fully synth oil. I'd say use 2% if your use is average and consider 2.5% if you drive hard and long. Last edited by Raccoon : 10th May 2009 at 12:11.
	() Thanks

10th May 2009, 15:19	#126
straight6 Senior - BHPian Join Date: Oct 2007 Location: Bombay Posts: 2,549 Thanked: 300 Times	Just check the first page of this thread. I have posted pictures of it.
	() Thanks

10th May 2009, 20:17	#127
Raccoon Senior - BHPian Join Date: Jan 2008 Location: Poona Posts: 1,851 Thanked: 116 Times	Yes I know, but if its a new stock it could have better ratings. Your pic just shows API TC and JASO FC... ie. it just meets it. Even minerals now exceed both these ratings. I'd expect better from a fully synth!!
	() Thanks

11th May 2009, 06:02	#128
straight6 Senior - BHPian Join Date: Oct 2007 Location: Bombay Posts: 2,549 Thanked: 300 Times	We'll only know if they've improved their ratings once Chirag tells us when his can is manufactured and if it has better ratings. "the pain" from the forum just used the Petronas 5000 I gave him a few days back in his rxz and says its made the bike smoother than before. Any feedback from Chirag? I'm going to change to it in a few days when my bike completes 1k. Note from the Team-BHP Support Team : Please use the "edit" button if posting within 15 minutes of the first post, instead of creating another back-to-back post Last edited by Technocrat : 12th May 2009 at 18:56. Reason: see note in post
	() Thanks

12th May 2009, 15:48	#129
Raccoon Senior - BHPian Join Date: Jan 2008 Location: Poona Posts: 1,851 Thanked: 116 Times	Smoother compared to which oil?? Seems Chirag hasn't been around.
	() Thanks

12th May 2009, 16:44	#130
chiragh_bir Senior - BHPian Join Date: Dec 2004 Location: In front of you :P Posts: 1,123 Thanked: 74 Times View My Garage	sorry i was busy with ICE threads.. yes i just added Petronas with Fresh petrol ( Old has to removed cause of Junk castrol mixed) I will check the bottle and tell the rating tomorrow . But its like 1 year old ,not many people use Synthetic 2T in north so dealer doesn't order.. I think to pick 4 bottles more so that there is no problem of stock in future Also will buy Petros 5000 4t for my gear box !!
	() Thanks

14th May 2009, 00:10	#133
straight6 Senior - BHPian Join Date: Oct 2007 Location: Bombay Posts: 2,549 Thanked: 300 Times	Any feedback Chirag?
	() Thanks

14th May 2009, 01:50	#134
Ravveendrra Senior - BHPian Join Date: Jan 2008 Location: Hyderabad Posts: 1,391 Thanked: 447 Times View My Garage	Highest detergent? I was searching this thread for info on the detergent content of the oils. I am looking for a 2T oil with high (highest) detergent to clean and clear out deposits. Please help guys. Cheers and thanks in advance,
	() Thanks