The Yamaha 'RX' Thread (with pics)

aa_asif · 26th September 2010, 13:18

Could anyone help me with the best gearbox oil & grade for Yamaha RXZ. Iam planning to change it by myself from now onwards?

alok_balsekar · 26th September 2010, 14:07

Quote:

Originally Posted by aa_asif

Could anyone help me with the best gearbox oil & grade for Yamaha RXZ. Iam planning to change it by myself from now onwards?

Hey there,

As per my RXZ 5-speed owners manual, it is Multigrade 20W40. Guess that should be OK with the 4-speed too

Any of the major brands should do OK.

baddy · 26th September 2010, 14:27

hi iam not a very active member in Tbhp, but i do keep going through the RX threads and some jeep threads often. I recently restored my 2001 RX135 5 speed. it is running 0.5 oversize stock block, fully painted, chassis strengthened, all engine parts and chassis parts replaced with brand new O.E. all the work was done by Anthony of DAM motors bangalore. Here are some pictures of the bike. the last picture was taken before restoration.

baddy · 26th September 2010, 14:34

it would be very helpfull if somebody can post the workshop and parts manual of RX135 5 speed. i tried the earlier links posted by others but they have all expired.

josejoseph · 26th September 2010, 14:35

@baddy, sweet sweet sweet bike. Do put the chrome beading for the seats.

5 speeds are the best from the RX series. How did you manage to replace the mechanical parts? AFAIK, spare parts for 5 speeds are non-existent.

Thanks,
Jose.

baddy · 26th September 2010, 15:17

Quote:

Originally Posted by josejoseph

@baddy, sweet sweet sweet bike. Do put the chrome beading for the seats.

5 speeds are the best from the RX series. How did you manage to replace the mechanical parts? AFAIK, spare parts for 5 speeds are non-existent.

Thanks,
Jose.

thanks for the nice words jose. I have got the original yamaha seats, but they have not been installed, will be doing so in a days time. and yeah thanks to my tuner for the parts.

aargee · 26th September 2010, 15:39

@Baddy - Beautiful; absolutely looking fresh as if its just out of showroom after PDI. Why's the last one looking shabby? Was that before restoration or just another Rx? You're in Chennai aren't you? How about a Rx meet? I can bring my Rx100 too

And if you don't mind, did you carry out the entire restoration by yourself like me or had it done through a mechanic in a garage?

Chipz · 26th September 2010, 22:37

Hey nice bike baddy, and nice paint job too. The last pic is the bike before restoration right. You are one of the lucky few to have a 5-speed

Aargee where is your bike pics.

aa_asif · 14th October 2010, 16:37

Quote:

Originally Posted by alok_balsekar

Hey there,

As per my RXZ 5-speed owners manual, it is Multigrade 20W40. Guess that should be OK with the 4-speed too

Any of the major brands should do OK.

I changed the gearbox oil 2 days back. The Oil shop guy recommended Shell Helix 20W-50.
Next is the clutch overhaul. The whole assembly is costing around Rs.1300. Planning to get the work done sometime time next month.

aargee · 14th October 2010, 20:12

Quote:

Originally Posted by aa_asif

I changed the gearbox oil 2 days back. The Oil shop guy recommended Shell Helix 20W-50.

That's the one to be stayed away, atleast I've been told to stay away. Reaon being, 20W-50 basically is for car & harder clutches that makes Rx's friction plates to be worn out soon. But personally, I love Shell products.

Quote:

Originally Posted by aa_asif

Next is the clutch overhaul. The whole assembly is costing around Rs.1300. Planning to get the work done sometime time next month.

Rs 1300? What're the parts apart from friction plates?

baddy · 18th October 2010, 12:18

Quote:

Originally Posted by aargee

@Baddy - Beautiful; absolutely looking fresh as if its just out of showroom after PDI. Why's the last one looking shabby? Was that before restoration or just another Rx? You're in Chennai aren't you? How about a Rx meet? I can bring my Rx100 too

And if you don't mind, did you carry out the entire restoration by yourself like me or had it done through a mechanic in a garage?

@aargee: thanks, sorry for the late reply havent cheked this thread for a long time. iam from chennai, studying here in bangalore. initially i thought of doing the complete restoration myself, but due to the lack of tools, space and time here i had to get it done from a garage n i usually dont trust my bikes with mechanics. Antony from DAM motors is one person whom i found trustful and really talented at his work, so the complete restoration was carried out at his place in bangalore.
Iam planning to drop the bike back in my chennai home once i finish running in the bike. so probably we can have a meet up then.

booboo · 24th October 2010, 10:48

twisty from the blessed land of why?zag!
age: 10 yrs
skin color: original - black
experience: 70000 odd km (mostly local beach road/city drives)

The Yamaha 'RX' Thread (with pics)-dsc03010.jpg

Sheel · 1st December 2010, 09:39

I am getting an entirely new engine for the junk'd RX I got myself.

Shall arrive in 15-20 days.

What color scheme would you guys recommend? I am swinging between blue and silver.

What mirrors would look appropriate?

I am putting a disc-brake too, hope the ones on Gladiator would be a fit along with its shock absorbers.

aargee · 1st December 2010, 09:45

Quote:

Originally Posted by Sheel

What color scheme would you guys recommend? I am swinging between blue and silver.

Silver with blue lines!!!

Quote:

Originally Posted by Sheel

What mirrors would look appropriate?

Ofcourse the OE Alfa Toyo!!!

Quote:

Originally Posted by Sheel

I am putting a disc-brake too, hope the ones on Gladiator would be a fit along with its shock absorbers.

Yes, discussed to death; Pulsar's also fits direct.

RaguHolla · 1st December 2010, 10:57

I am having problem with my Rx 135, 1999 model. I am very happy with the bike. But now I find that bike maxes out at 65kmh. It reaches till 85kmh, but this isn't smooth, lots of smoke. I rode this bike till 120kmh, but now max is 85kmh. Most part are from stock only except, both Tyres, Chain, Battery and regular wear and tear parts (clutch cable, break pads).

What could be issue?

As aargee says, I wouldn't want to go to mechanic with problem. If I know the issue, then I can directly tell him what is expected and watch him do the same in-front of me.

Any help would be appreciated.

26th September 2010, 13:18	#451
aa_asif BHPian Join Date: Jun 2008 Location: KL 07 > KA 03 Posts: 255 Thanked: 67 Times View My Garage	Could anyone help me with the best gearbox oil & grade for Yamaha RXZ. Iam planning to change it by myself from now onwards?
	() Thanks

26th September 2010, 14:27	#453
baddy BHPian Join Date: Oct 2005 Location: Chennai Posts: 83 Thanked: 101 Times View My Garage	hi iam not a very active member in Tbhp, but i do keep going through the RX threads and some jeep threads often. I recently restored my 2001 RX135 5 speed. it is running 0.5 oversize stock block, fully painted, chassis strengthened, all engine parts and chassis parts replaced with brand new O.E. all the work was done by Anthony of DAM motors bangalore. Here are some pictures of the bike. the last picture was taken before restoration. Attached Thumbnails Last edited by baddy : 26th September 2010 at 14:31.
	(1) Thanks

26th September 2010, 14:34	#454
baddy BHPian Join Date: Oct 2005 Location: Chennai Posts: 83 Thanked: 101 Times View My Garage	it would be very helpfull if somebody can post the workshop and parts manual of RX135 5 speed. i tried the earlier links posted by others but they have all expired.
	() Thanks

26th September 2010, 14:35	#455
josejoseph BHPian Join Date: Oct 2006 Location: San Jose, CA Posts: 665 Thanked: 408 Times View My Garage	@baddy, sweet sweet sweet bike. Do put the chrome beading for the seats. 5 speeds are the best from the RX series. How did you manage to replace the mechanical parts? AFAIK, spare parts for 5 speeds are non-existent. Thanks, Jose.
	() Thanks

26th September 2010, 15:39	#457
aargee Senior - BHPian Join Date: Jan 2010 Location: TSTN Posts: 6,329 Thanked: 9,990 Times	@Baddy - Beautiful; absolutely looking fresh as if its just out of showroom after PDI. Why's the last one looking shabby? Was that before restoration or just another Rx? You're in Chennai aren't you? How about a Rx meet? I can bring my Rx100 too And if you don't mind, did you carry out the entire restoration by yourself like me or had it done through a mechanic in a garage?
	() Thanks

26th September 2010, 22:37	#458
Chipz BHPian Join Date: Sep 2009 Location: Trivandrum, Thrissur Posts: 160 Thanked: 6 Times	Hey nice bike baddy, and nice paint job too. The last pic is the bike before restoration right. You are one of the lucky few to have a 5-speed Aargee where is your bike pics.
	() Thanks

24th October 2010, 10:48	#462
booboo BHPian Join Date: Nov 2009 Location: vizag Posts: 59 Thanked: 16 Times View My Garage	twisty from the blessed land of why?zag! age: 10 yrs skin color: original - black experience: 70000 odd km (mostly local beach road/city drives)
	() Thanks

1st December 2010, 09:39	#463
Sheel Team-BHP Support Join Date: Jul 2006 Location: Purnea (Bihar) Posts: 9,935 Thanked: 15,000 Times View My Garage	Phew, finally!!! I am getting an entirely new engine for the junk'd RX I got myself. Shall arrive in 15-20 days. What color scheme would you guys recommend? I am swinging between blue and silver. What mirrors would look appropriate? I am putting a disc-brake too, hope the ones on Gladiator would be a fit along with its shock absorbers.
	() Thanks

1st December 2010, 10:57	#465
RaguHolla BHPian Join Date: Mar 2010 Location: Bangalore Posts: 416 Thanked: 337 Times	RX 135 help required I am having problem with my Rx 135, 1999 model. I am very happy with the bike. But now I find that bike maxes out at 65kmh. It reaches till 85kmh, but this isn't smooth, lots of smoke. I rode this bike till 120kmh, but now max is 85kmh. Most part are from stock only except, both Tyres, Chain, Battery and regular wear and tear parts (clutch cable, break pads). What could be issue? As aargee says, I wouldn't want to go to mechanic with problem. If I know the issue, then I can directly tell him what is expected and watch him do the same in-front of me. Any help would be appreciated.
	() Thanks