Price for 3M sunfilm?

msdivy · 24th October 2011, 11:44

Got these fitted:
Front: CR70 - 7.5K (in Aug 11, 3M Car Care HSR, Bangalore)
Rear, sides: RE35 - 4.9K (in Oct 11, Konark, Jayanagar, Bangalore) [3M had quoted 5.6K]

I remember the 3M guys at HSR telling that RE35 for rear & side for a car comes in a box and so only side or only rear cannot be done. But the guys at Konark pulled out a big roll of RE35, cut the film according to size & fitted it.
Does RE35 come in both as a box for a car and also as a big roll?

PS: CR70 at 3M HSR was done from the film roll.

volkman10 · 24th October 2011, 11:52

CS50 spec, its a light film within RTO regulations. Not heard of CD50 though!

CS50
Solar Energy Rejection37%
Ultraviolet99%
Visible Light Transmission51%
Visible Light Reflection7%

Cheers!

keyank · 24th October 2011, 12:01

Sorry it was typo error, i meant CS50 only.
thanks once again

motomaverick · 24th October 2011, 13:38

Quote:

Originally Posted by keyank

Motomaverick would you have a copy of the quote from 3M HSR Layout? I went yesterday for a sun film and under body treatment for my JAZZ and was quoted higher.

I understand Jazz and Manza are both under medium vehicle category as per 3M pricing.The centre manager was quoting about Rs.5200 for CS35 and was adamant that there cannot be a pricing less than this for Manza. I also logged in and showed him this tread/message.
He also did speak to Sidhu and i did speak to him, he was doing the usual sales pitch as company fixed prices etc.

underbody i was offered Rs.3175 or so with 5 year warranty.
Members please suggest an alternative and reliable location?
thanks in advance
keyan

Hey Keyan, infact i also got a higher quote and the reason given was price revision, i paid 5200 for the CS35 on the sides. So i am guessing you would also have got the same price.

Sidhu bangalore · 24th October 2011, 16:23

[/quote] I understand Jazz and Manza are both under medium vehicle category as per 3M pricing.The centre manager was quoting about Rs.5200 for CS35 and was adamant that there cannot be a pricing less than this for Manza. I also logged in and showed him this tread/message.
He also did speak to Sidhu and i did speak to him, he was doing the usual sales pitch as company fixed prices etc.

underbody i was offered Rs.3175 or so with 5 year warranty.
Members please suggest an alternative and reliable location?
thanks in advance
keyan

Hi Keyan,

Prices for the sunfilm have been revised from 3rd of October for all the

sunfilms. even hirak also got the filming done recently.

CS series for your Jazz will be costing 5250 with 3 years warranty (even for polo also) as of today.

and the underbody 5 years warranty will be 3195.

I just want to clarify on this and the everyone agree with the fact that 3M is a reliable company.

As a customer you can always go to anyplace of your choice.

DKW · 30th October 2011, 12:53

Hello Team, I'm planning to install 3M sunfilm RE50 on the sides and rear and CS50 in the front of our Honda Jazz in Mumbai. I'm sticking to the ones which comply with Goa RTO as they are pretty strict with darker tints.

I'd appreciate approximate prices for the same so as to budget accordingly.

Could you also provide a list of 3M Authorised dealers preferably in and around Borivli (W)?

Cheers.

M124 · 31st October 2011, 20:08

refer to post no. 398 on the previous page for details.

spiritofdriving · 18th November 2011, 11:48

Received the below Quote from 3M authorised dealer at Nagar Road Pune for my Fiesta Classic (6 years old now).

Below are the details quoted by the 3M guy himself including the HR, UV protection and Visibility percentages for Sides and Rear .

SP grade - 50% Visibility- 2.6K (not recommended unless you are on tight budget - I dint get the full details on this one).

CS Series - 33% HR, UV 99%, 50% Visibility (RE50 I guess) - Rs.5250/-
RE Series - 43% HR, 99.99% UV, 52% Visibility (RE50 I guess) - Rs.5675/-
CR50 - 56% HR, UV 99.99%, 50% Visibility - Rs.17500/- On this alone he offers a discounted price of 16200. Says this is the earlier price.

Front Windshield: CR70 - Rs.7750/-

Combo prices quoted (Front + Sides + Rear):
CR70 + RE - Rs.13425/-
CR70 + CR - Rs.25250/-

Exterior work:

Paint protection - 4495 on which I can get 10% Discount

Please can anyone suggest if these sound good? I think the CR70 rate quoted is high based on my reading here.

Any help appreciated.

Thanks.

ninjatalli · 18th November 2011, 12:32

Quote:

Originally Posted by spiritofdriving

Received the below Quote from 3M authorised dealer at Nagar Road Pune for my Fiesta Classic (6 years old now).

Below are the details quoted by the 3M guy himself including the HR, UV protection and Visibility percentages for Sides and Rear .

SP grade - 50% Visibility- 2.6K (not recommended unless you are on tight budget - I dint get the full details on this one).

CS Series - 33% HR, UV 99%, 50% Visibility (RE50 I guess) - Rs.5250/-
RE Series - 43% HR, 99.99% UV, 52% Visibility (RE50 I guess) - Rs.5675/-
CR50 - 56% HR, UV 99.99%, 50% Visibility - Rs.17500/- On this alone he offers a discounted price of 16200. Says this is the earlier price.

Front Windshield: CR70 - Rs.7750/-

Combo prices quoted (Front + Sides + Rear):
CR70 + RE - Rs.13425/-
CR70 + CR - Rs.25250/-

Exterior work:

Paint protection - 4495 on which I can get 10% Discount

Please can anyone suggest if these sound good? I think the CR70 rate quoted is high based on my reading here.

Any help appreciated.

Thanks.

Would suggest you to try out Carex, Baner (Opposite Sadanand & VITS, adjacent to Express highway).

I got my 3M sunflim done at their place a month back for my Vento - good work done by them.
Combo Price (RE50 + CR70) : 11000
Side & Back : RE50 : 4500
Front : CR70 : 6500

Even if I had gone for either of the two sections, the prices applicable was as above.
Nothing extra paid (they have boards put up stating labor charges & credit card 2% charges would be in addition to the price).

If you are going for additional work (paint protection as you mentioned), you can bargain a better deal.

spiritofdriving · 18th November 2011, 14:03

Quote:

Originally Posted by ninjatalli

Would suggest you to try out Carex, Baner (Opposite Sadanand & VITS, adjacent to Express highway).
I got my 3M sunflim done at their place a month back for my Vento - good work done by them.
Combo Price (RE50 + CR70) : 11000
Side & Back : RE50 : 4500
Front : CR70 : 6500
Even if I had gone for either of the two sections, the prices applicable was as above.
Nothing extra paid (they have boards put up stating labor charges & credit card 2% charges would be in addition to the price).
If you are going for additional work (paint protection as you mentioned), you can bargain a better deal.

Thank You Ninja for that info. and must say you were quick!

I work in Hinjewadi, so Carex is quite nearby. I will try that.

Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70?

I am a novice in this - so unsure if there will be any branding or if it comes in packets or cut out from a big roll - so this relates to the validating question of how I can validate!

spiritofdriving · 18th November 2011, 14:06

@ninjatalli

Thank You Ninja for that info. and must say you were quick!

I work in Hinjewadi, so Carex is quite nearby. I will try that.

Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70?

I am a novice in this - so unsure if there will be any branding or if it comes in packets or cut out from a big roll - so this relates to the validating question of how I can validate!

Sree

spiritofdriving · 18th November 2011, 14:10

@ninjatalli -

Thank You Ninja for that info. and must say you were quick!

I work in Hinjewadi, so Carex is quite nearby. I will try that.

Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70?

I am a novice in this - so unsure if there will be any branding or if it comes in packets or cut out from a big roll - so this relates to the validating question of how I can validate!

ninjatalli · 18th November 2011, 15:45

Quote:

Originally Posted by spiritofdriving

Thank You Ninja for that info. and must say you were quick!

I work in Hinjewadi, so Carex is quite nearby. I will try that.

Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70?

I am a novice in this - so unsure if there will be any branding or if it comes in packets or cut out from a big roll - so this relates to the validating question of how I can validate!

Generally there is a 3M executive to watch over the work & to ensure that they do use 3M material (heard this from the guy himself). In my case he was there overseeing the entire operation. The downside is he'll probably try to sell a lot more 3M products to you.

Also you'll recieve warranty cards for the films - the RE series has a 3 year warranty, while the CS series has a 5 year warranty. I have both the warranty cards for my car.

Swanand Inamdar · 18th November 2011, 15:54

Quote:

Originally Posted by spiritofdriving

Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70?

Carax is a pretty well known dealer. He has another shop on JM road too (Bhandari Auto). So, even if its external party (this guy is 3M Authorized), the stuff used will be genuine. They would also give you the warranty card.

See what quote this guy gives you. Carax, is generally considered to be pricey. Compare it to others and then settle in for the cheapest.

spiritofdriving · 18th November 2011, 20:47

Quote:

Originally Posted by ninjatalli

Generally there is a 3M executive to watch over the work & to ensure that they do use 3M material (heard this from the guy himself). In my case he was there overseeing the entire operation. The downside is he'll probably try to sell a lot more 3M products to you.
Also you'll recieve warranty cards for the films - the RE series has a 3 year warranty, while the CS series has a 5 year warranty. I have both the warranty cards for my car.

Quote:

Originally Posted by Swanand Inamdar

Carax is a pretty well known dealer. He has another shop on JM road too (Bhandari Auto). So, even if its external party (this guy is 3M Authorized), the stuff used will be genuine. They would also give you the warranty card. See what quote this guy gives you. Carax, is generally considered to be pricey. Compare it to others and then settle in for the cheapest.

Thank You Ninja and Swanand for the info.
I went to Carax this evening - the sales guy Mr.Bhandari, is well spoken, explained the technicalities, gave me a quote for 3M and YES he did manage to instill enough confidence in me. Showroom itself was quite good with a basement facility where they do installations etc.

Quote given is as below.

3M:

CR 70 - 7750 (F)
RE 50 - 5675 (S+R)
------
Total - 13425

After discount he quoted 11,800 as final price. What do you guys say?

24th October 2011, 11:44	#406
msdivy Senior - BHPian Join Date: Aug 2006 Location: Bangalore Posts: 1,879 Thanked: 3,066 Times	Re: Price for 3M sunfilm? Got these fitted: Front: CR70 - 7.5K (in Aug 11, 3M Car Care HSR, Bangalore) Rear, sides: RE35 - 4.9K (in Oct 11, Konark, Jayanagar, Bangalore) [3M had quoted 5.6K] I remember the 3M guys at HSR telling that RE35 for rear & side for a car comes in a box and so only side or only rear cannot be done. But the guys at Konark pulled out a big roll of RE35, cut the film according to size & fitted it. Does RE35 come in both as a box for a car and also as a big roll? PS: CR70 at 3M HSR was done from the film roll.
	() Thanks

24th October 2011, 11:52	#407
volkman10 Distinguished - BHPian Join Date: Dec 2010 Location: -- Posts: 25,624 Thanked: 78,203 Times View My Garage	Re: Price for 3M sunfilm? CS50 spec, its a light film within RTO regulations. Not heard of CD50 though! CS50 Solar Energy Rejection37% Ultraviolet99% Visible Light Transmission51% Visible Light Reflection7% Cheers!
	() Thanks

24th October 2011, 12:01	#408
keyank BHPian Join Date: Jun 2007 Location: Bangalore Posts: 72 Thanked: 5 Times	Re: Price for 3M sunfilm? Sorry it was typo error, i meant CS50 only. thanks once again
	() Thanks

24th October 2011, 16:23	#410
Sidhu bangalore Newbie Join Date: Jul 2011 Location: bangalore Posts: 12 Thanked: 24 Times	Re: Price for 3M sunfilm? [/quote] I understand Jazz and Manza are both under medium vehicle category as per 3M pricing.The centre manager was quoting about Rs.5200 for CS35 and was adamant that there cannot be a pricing less than this for Manza. I also logged in and showed him this tread/message. He also did speak to Sidhu and i did speak to him, he was doing the usual sales pitch as company fixed prices etc. underbody i was offered Rs.3175 or so with 5 year warranty. Members please suggest an alternative and reliable location? thanks in advance keyan Hi Keyan, Prices for the sunfilm have been revised from 3rd of October for all the sunfilms. even hirak also got the filming done recently. CS series for your Jazz will be costing 5250 with 3 years warranty (even for polo also) as of today. and the underbody 5 years warranty will be 3195. I just want to clarify on this and the everyone agree with the fact that 3M is a reliable company. As a customer you can always go to anyplace of your choice.
	() Thanks

30th October 2011, 12:53	#411
DKW BHPian Join Date: Sep 2010 Location: Dubai Posts: 28 Thanked: 15 Times	Re: Price for 3M sunfilm? Hello Team, I'm planning to install 3M sunfilm RE50 on the sides and rear and CS50 in the front of our Honda Jazz in Mumbai. I'm sticking to the ones which comply with Goa RTO as they are pretty strict with darker tints. I'd appreciate approximate prices for the same so as to budget accordingly. Could you also provide a list of 3M Authorised dealers preferably in and around Borivli (W)? Cheers.
	() Thanks

31st October 2011, 20:08	#412
M124 BHPian Join Date: Mar 2009 Location: mumbai Posts: 148 Thanked: 35 Times	Re: Price for 3M sunfilm? refer to post no. 398 on the previous page for details.
	() Thanks

18th November 2011, 11:48	#413
spiritofdriving BHPian Join Date: Jul 2009 Location: Pune/Calicut Posts: 56 Thanked: 28 Times	Re: Price for 3M sunfilm? Received the below Quote from 3M authorised dealer at Nagar Road Pune for my Fiesta Classic (6 years old now). Below are the details quoted by the 3M guy himself including the HR, UV protection and Visibility percentages for Sides and Rear . SP grade - 50% Visibility- 2.6K (not recommended unless you are on tight budget - I dint get the full details on this one). CS Series - 33% HR, UV 99%, 50% Visibility (RE50 I guess) - Rs.5250/- RE Series - 43% HR, 99.99% UV, 52% Visibility (RE50 I guess) - Rs.5675/- CR50 - 56% HR, UV 99.99%, 50% Visibility - Rs.17500/- On this alone he offers a discounted price of 16200. Says this is the earlier price. Front Windshield: CR70 - Rs.7750/- Combo prices quoted (Front + Sides + Rear): CR70 + RE - Rs.13425/- CR70 + CR - Rs.25250/- Exterior work: Paint protection - 4495 on which I can get 10% Discount Please can anyone suggest if these sound good? I think the CR70 rate quoted is high based on my reading here. Any help appreciated. Thanks.
	() Thanks

18th November 2011, 14:06	#416
spiritofdriving BHPian Join Date: Jul 2009 Location: Pune/Calicut Posts: 56 Thanked: 28 Times	Re: Price for 3M sunfilm? @ninjatalli Thank You Ninja for that info. and must say you were quick! I work in Hinjewadi, so Carex is quite nearby. I will try that. Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70? I am a novice in this - so unsure if there will be any branding or if it comes in packets or cut out from a big roll - so this relates to the validating question of how I can validate! Sree
	() Thanks

18th November 2011, 14:10	#417
spiritofdriving BHPian Join Date: Jul 2009 Location: Pune/Calicut Posts: 56 Thanked: 28 Times	Re: Price for 3M sunfilm? @ninjatalli - Thank You Ninja for that info. and must say you were quick! I work in Hinjewadi, so Carex is quite nearby. I will try that. Also - if done from an external party (meant, other than 3M Authorized ones), how can we ensure that the material used is indeed the one we've paid for? like in this case, validating CR70 being CR70? I am a novice in this - so unsure if there will be any branding or if it comes in packets or cut out from a big roll - so this relates to the validating question of how I can validate!
	() Thanks