performance engine for zen wanted

naturaldisaster · 26th June 2007, 19:41

hi all.... i managed to see lot of high performance zens in this years speedrun. i would like to know where it would be possible to get engines like that in delhi side.

i managed to see the honda hyper ivtec engines on zens. i was also wondering if nissan has engines like this (iam a nissan fan).

plz advise.. any lead or suggestions will be most welcome

cheers!

ND

Akshay1234 · 26th June 2007, 20:05

you could try arush (autopsyche).
IMO - the best engines for the zen are the g13b (esteem) and the g16b (baleno).

v1p3r · 26th June 2007, 20:08

I've never seen a Hyper iVtec engine in my life, let alone in a Zen.

manikjeet · 26th June 2007, 20:10

their is thread on E B and V zens

EDIT here the link to the thread
http://www.team-bhp.com/forum/modifi...ns-b-zens.html

IronWolf · 26th June 2007, 21:48

Cousin has a e-zen.. good power to weight ratio. The 0-60 is amazing. Can take on a stock Baleno without any problem.

Will want to try to take him on with some mods soon... more on that later

dragger · 27th June 2007, 04:22

hey buddy if your looking for an engine to install in a zen i would adivse you to get your self an imported old gen swift gti engine with mounts,gear box,ecm & wiring,this is a twincam g13b with a better bore x stroke and many bolt on parts available for it,its a little expensive but the outcome that can be achieved from it is outstanding,the other options as mentioned to you already are the g13b,g16b most parts from these engines can be mixed and matched but please make sure you know all the technical detail's before you decide to experiment,hope i could help,cheers happy revvin..!

ananthkamath · 27th June 2007, 07:14

Quote:

Originally Posted by dragger

hey buddy if your looking for an engine to install in a zen i would adivse you to get your self an imported old gen swift gti engine with mounts,gear box,ecm & wiring,this is a twincam g13b

I agree. But only if you want a "max effort" car and your budget is big. There are Swift GTis doing 13 seconds on the strip without NOS or turbochargers.

mclaren1885 · 27th June 2007, 12:35

GT engines are available for quite a good price at bangalore but without the wiring harness and ECU. Which means you have to go carbed or run a standalone. Advantage is you get a lot of aftermarket cams, flywheels, valve springs, retainers, bolt on turbo kits etc.

naturaldisaster · 27th June 2007, 13:34

hi all.. thanks for the info!

well, it will be atleast 1 yr min before i get active on the mods. just getting some basic info on car mods, there is a team called GAME OVER in bombay. it was sugested by a friend... will check it out.

@ VIPER - since youve never seen a honda hyper, ive posted a pic of the car i saw in speedrun this year.

@dragger - thanks for advice, have it jotted down

@anandkamath - just curious, how much could the 'max effort car' cost? excluding the car

ananthkamath · 29th June 2007, 09:37

Quote:

Originally Posted by naturaldisaster

@anandkamath - just curious, how much could the 'max effort car' cost? excluding the car

I have no idea how much it costs.

mclaren1885 · 29th June 2007, 11:28

Quote:

Originally Posted by naturaldisaster

@ VIPER - since youve never seen a honda hyper, ive posted a pic of the car i saw in speedrun this year.

Haha. Thats a stock Indian Vtec engine mate. v1p3r knows, because we have seen that car go through some of the work at the garage we visit. Infact, he was even offered to drive that car. A chance that he didn't take.

Quote:

just curious, how much could the 'max effort car' cost? excluding the car

Well there are 450bhp 1.6L TCed engines from one of the suzuki tuning companies retailing for about 12,399 $ I guess. Only problem being these will certainly shred the zen into bits.

jesal · 29th June 2007, 12:06

Quote:

Originally Posted by mclaren1885

Haha. Thats a stock Indian Vtec engine mate. v1p3r knows, because we have seen that car go through some of the work at the garage we visit. Infact, he was even offered to drive that car. A chance that he didn't take.

Well there are 450bhp 1.6L TCed engines from one of the suzuki tuning companies retailing for about 12,399 $ I guess. Only problem being these will certainly shred the zen into bits.

how is that a VTEC when the cover looks like the ones from 1.5 ones. VTEC has the name written all over the place right ?

manson · 29th June 2007, 12:11

Quote:

Originally Posted by mclaren1885

Well there are 450bhp 1.6L TCed engines from one of the suzuki tuning companies retailing for about 12,399 $ I guess. Only problem being these will certainly shred the zen into bits.

For the sake of correction, the quoted figure is 425 bhP

manson.

mclaren1885 · 29th June 2007, 12:14

Quote:

Originally Posted by jesal

how is that a VTEC when the cover looks like the ones from 1.5 ones. VTEC has the name written all over the place right ?

That cover is from the owners yellow 1.5vtec (currently exi) I guess. Mind games?

Mason, its 450 baba. Don't know which site are you talking about.

ananthkamath · 29th June 2007, 20:16

450 hp? Wow. I think our tuners first need to think about how to get around the 13 second mark without NOS/turbo.

Correct me if im wrong but the fastest zen is around 13.xx but with NOS/turbo, right?

26th June 2007, 19:41	#1
naturaldisaster BHPian Join Date: Jun 2007 Location: Noida Posts: 281 Thanked: 141 Times View My Garage	performance engine for zen wanted hi all.... i managed to see lot of high performance zens in this years speedrun. i would like to know where it would be possible to get engines like that in delhi side. i managed to see the honda hyper ivtec engines on zens. i was also wondering if nissan has engines like this (iam a nissan fan). plz advise.. any lead or suggestions will be most welcome cheers! ND
	() Thanks

26th June 2007, 20:05	#2
Akshay1234 Distinguished - BHPian Join Date: Dec 2006 Location: Mumbai Posts: 10,327 Thanked: 12,914 Times	you could try arush (autopsyche). IMO - the best engines for the zen are the g13b (esteem) and the g16b (baleno).
	() Thanks

26th June 2007, 20:08	#3
v1p3r Senior - BHPian Join Date: Feb 2005 Location: BLR / DXB / LON Posts: 5,359 Thanked: 7,446 Times View My Garage	I've never seen a Hyper iVtec engine in my life, let alone in a Zen.
	() Thanks

26th June 2007, 20:10	#4
manikjeet Senior - BHPian Join Date: Sep 2006 Location: chandigarh Posts: 1,617 Thanked: 296 Times View My Garage	their is thread on E B and V zens EDIT here the link to the thread http://www.team-bhp.com/forum/modifi...ns-b-zens.html Last edited by manikjeet : 26th June 2007 at 20:13. Reason: link found
	() Thanks

26th June 2007, 21:48	#5
IronWolf Senior - BHPian Join Date: Jun 2007 Location: Benga-loo-ru Posts: 1,569 Thanked: 45 Times View My Garage	Cousin has a e-zen.. good power to weight ratio. The 0-60 is amazing. Can take on a stock Baleno without any problem. Will want to try to take him on with some mods soon... more on that later
	() Thanks

27th June 2007, 04:22	#6
dragger BHPian Join Date: Nov 2004 Location: India-Mumbai-Colaba Posts: 350 Thanked: 6 Times	hey buddy if your looking for an engine to install in a zen i would adivse you to get your self an imported old gen swift gti engine with mounts,gear box,ecm & wiring,this is a twincam g13b with a better bore x stroke and many bolt on parts available for it,its a little expensive but the outcome that can be achieved from it is outstanding,the other options as mentioned to you already are the g13b,g16b most parts from these engines can be mixed and matched but please make sure you know all the technical detail's before you decide to experiment,hope i could help,cheers happy revvin..!
	() Thanks

27th June 2007, 12:35	#8
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,818 Thanked: 46 Times View My Garage Infractions: 0/1 (10)	GT engines are available for quite a good price at bangalore but without the wiring harness and ECU. Which means you have to go carbed or run a standalone. Advantage is you get a lot of aftermarket cams, flywheels, valve springs, retainers, bolt on turbo kits etc.
	() Thanks

27th June 2007, 13:34	#9
naturaldisaster BHPian Join Date: Jun 2007 Location: Noida Posts: 281 Thanked: 141 Times View My Garage	hi all.. thanks for the info! well, it will be atleast 1 yr min before i get active on the mods. just getting some basic info on car mods, there is a team called GAME OVER in bombay. it was sugested by a friend... will check it out. @ VIPER - since youve never seen a honda hyper, ive posted a pic of the car i saw in speedrun this year. @dragger - thanks for advice, have it jotted down @anandkamath - just curious, how much could the 'max effort car' cost? excluding the car
	() Thanks

29th June 2007, 20:16	#15
ananthkamath Senior - BHPian Join Date: Jul 2005 Location: Mangalore Posts: 1,209 Thanked: 82 Times View My Garage	450 hp? Wow. I think our tuners first need to think about how to get around the 13 second mark without NOS/turbo. Correct me if im wrong but the fastest zen is around 13.xx but with NOS/turbo, right?
	() Thanks