How much would an Evo-ish kit for the Lancer cost?

Team Fiat · 5th September 2004, 17:53

Hi guys I think I can give youll an idea when I was working with Mitsubishi
a lot of cars woul come to get kitted ok mostly the GLXI and the Slxi the whole thing would come up to 50 thousand thats every thing bumper front and rear side skirts , front bumper with extra head lamps painting of the bumpers and skirts and this kit would come from abroad on demand (orginal )
engine work would be done only if the customer wants and not much K&N filter spark plugs reset the idling ( advance it ) by a degree or so just for better pick up and if the customer wants to go all the way mags and tyres
tyres 205 r 15 hanook because they are the best for indian roads and the rims can be local or imported but this takes time the rims have to come from abroad but this whole deal takes about 15 days but there is allways the risk of scrapping the bumpers over speed brakers many of these guys have come back in a few days with riped of front bumpers but thats the risk u take So check it out

speedsatya · 8th September 2004, 02:02

Quote:

Originally Posted by [b

Quote[/b] (aalaap @ Sep. 05 2004,13:05)]I've seen the rio kits and quite frankly, Im not most impressed by those. Partly due to the fact that you see Rio'd Lancers almost everyday at every corner of any cool street.

Anyway .. where at Pali is Rio? Any contact number? Are they open on Sundays?

- Aalaap

address for rio design

34/B,pali hill ,bandra(west),mumbai-050

tel:022 2646 0758/9820076815

i think his name is rehaan.,not sure,had talked to him abt a year ago.

S600BENZ · 8th September 2004, 13:21

Given below is a complete conversion from the Stock Lancer to exactly the EVO VI. All body parts are in Fibre Glass. Also are mentioned additional interior and exterior accessories.

EVOLUTION VI BODY KIT * * * * * * * * * * * * * 65,000.00
RIMS & TYRES 17" E.T 10 * * * * * * * * * * * * * 60,000.00
MOMO SET OF STEERING WHEEL & GEAR KNOB 18,500.00
RECARO SEATS WITH 4 POINT HARNESS * * * * * *21,000.00
METER POD * * * * * * * * * * * * * * * * * * * * 2,500.00
3 METERS * * * * * * * * * * * * * * * * * * * * 7,500.00
RALLIART FOOT STEPS * * * * * * * * * * * * * *1,500.00
RALLIART WIPERS * * * * * * * * * * * * * * * * * * * * 1,000.00
RALLIART MUD FLAPS * * * * * * * * * * * * * *3,500.00
ILLUMINATED NEON SPEEDOMETER * * * * * * * 3,000.00
MUFFLER WITH FREE FLOW * * * * * * * * * * * * * 10,500.00
PAINTING AND FITTING * * * * * * * * * * * * * 25,000.00

The EVO VI kit consists of the following:
BONNET
FRONT BUMPER
HELLA FOG LAMP LEFT
HELLA FOG LAMP RIGHT
FRONT HEADLAMP LEFT
FRONT HEADLAMP RIGHT
SIDE INDICATOR LEFT
SIDE INDICATOR RIGHT
FRONT FENDER LEFT
FRONT FENDER RIGHT
SIDE SKIRT LEFT
SIDE SKIRT RIGHT
REAR DOOR FLARE LEFT
REAR DOOR FLARE RIGHT
REAR FENDER FLARE LEFT
REAR FENDER FLARE RIGHT
REAR SPOILER
REAR BUMPER
I hope that helps your query. Will put up pics of a Lancer that I have modified to the above specifications soon.
Thanks
Sunil Bhatia
RPM Accessories
+919820096797

S600BENZ · 8th September 2004, 13:29

This is a EVO VI LANCER that I had modified about a yr ago. It has all the mods mentioned above.

S600BENZ · 8th September 2004, 13:32

Forgot to mention the Lancer also has M3 style mirrors with Indicators as well as the Crystal Tail Lamps.

Rehaan · 8th September 2004, 17:16

Quote:

Originally Posted by [b

Quote[/b] (S600BENZ @ Sep. 08 2004,12:02)]as well as the Crystal Tail Lamps.

Hey S600...

I have seen this car about a year ago...it really looks good!!

However, i wish it didnt have the crystal taillamps...

...would have given the car a much more authentic look IMO.

cya
R

S600BENZ · 8th September 2004, 22:54

In retrospect even I feel the same about the tail lamps but the client insisted on them. So as the old saying goes "The Customer is always right(I guess)".

X-Machine · 8th September 2004, 22:58

Neat job apart from the tail-lamps.
Looks good.
Cya.

bhp · 13th September 2004, 17:02

all the ks cars are done at carmodernize . it is loacted in colaba and the job done there is fantastic

Kenneth Keymer · 31st January 2018, 02:01

I’m joining the party very late in the day, but could someone tell me how many of these shops are still open perchance? Also, how much would it cost in 2018 for an evo conversion?

greenhorn · 31st January 2018, 08:09

Why spend good money to convert - I am sure one of these conversions should show up for sale much cheaper ( and you can use the money to clean up the mechanicals)

Sz-14 · 7th February 2018, 19:26

Hello everyone.

I am fairly new to the car scene, and lack knowledge about garages and tuners in Mumbai.

I wanted to convert a lancer into a Evo IV (full conversion with 4wd, 4g63t engine, etc). However, I am a little unsure about how I should go about doing that.

Searching on the forums revealed that KS Motorsports used to do the conversion, but they don't do it anymore.

Any help/advice is appreciated. Also sorry if this was the wrong place to post this!

5th September 2004, 17:53	#16
Team Fiat BHPian Join Date: Mar 2004 Location: Pune NIBM Posts: 281 Thanked: 4 Times View My Garage	Hi guys I think I can give youll an idea when I was working with Mitsubishi a lot of cars woul come to get kitted ok mostly the GLXI and the Slxi the whole thing would come up to 50 thousand thats every thing bumper front and rear side skirts , front bumper with extra head lamps painting of the bumpers and skirts and this kit would come from abroad on demand (orginal ) engine work would be done only if the customer wants and not much K&N filter spark plugs reset the idling ( advance it ) by a degree or so just for better pick up and if the customer wants to go all the way mags and tyres tyres 205 r 15 hanook because they are the best for indian roads and the rims can be local or imported but this takes time the rims have to come from abroad but this whole deal takes about 15 days but there is allways the risk of scrapping the bumpers over speed brakers many of these guys have come back in a few days with riped of front bumpers but thats the risk u take So check it out
	() Thanks

8th September 2004, 13:21	#18
S600BENZ BHPian Join Date: Mar 2004 Location: Mumbai Posts: 304 Thanked: 12 Times	Given below is a complete conversion from the Stock Lancer to exactly the EVO VI. All body parts are in Fibre Glass. Also are mentioned additional interior and exterior accessories. EVOLUTION VI BODY KIT * * * * * * * * * * * * * 65,000.00 RIMS & TYRES 17" E.T 10 * * * * * * * * * * * * * 60,000.00 MOMO SET OF STEERING WHEEL & GEAR KNOB 18,500.00 RECARO SEATS WITH 4 POINT HARNESS * * * * * 21,000.00 METER POD * * * * * * * * * * * * * * * * * * * 2,500.00 3 METERS * * * * * * * * * * * * * * * * * * * * 7,500.00 RALLIART FOOT STEPS * * * * * * * * * * * * * 1,500.00 RALLIART WIPERS * * * * * * * * * * * * * * * * * * * 1,000.00 RALLIART MUD FLAPS * * * * * * * * * * * * * 3,500.00 ILLUMINATED NEON SPEEDOMETER * * * * * * 3,000.00 MUFFLER WITH FREE FLOW * * * * * * * * * * * * * 10,500.00 PAINTING AND FITTING * * * * * * * * * * * * * 25,000.00 The EVO VI kit consists of the following: BONNET FRONT BUMPER HELLA FOG LAMP LEFT HELLA FOG LAMP RIGHT FRONT HEADLAMP LEFT FRONT HEADLAMP RIGHT SIDE INDICATOR LEFT SIDE INDICATOR RIGHT FRONT FENDER LEFT FRONT FENDER RIGHT SIDE SKIRT LEFT SIDE SKIRT RIGHT REAR DOOR FLARE LEFT REAR DOOR FLARE RIGHT REAR FENDER FLARE LEFT REAR FENDER FLARE RIGHT REAR SPOILER REAR BUMPER I hope that helps your query. Will put up pics of a Lancer that I have modified to the above specifications soon. Thanks Sunil Bhatia RPM Accessories +919820096797
	() Thanks

8th September 2004, 13:29	#19
S600BENZ BHPian Join Date: Mar 2004 Location: Mumbai Posts: 304 Thanked: 12 Times	This is a EVO VI LANCER that I had modified about a yr ago. It has all the mods mentioned above.
	(1) Thanks

8th September 2004, 13:32	#20
S600BENZ BHPian Join Date: Mar 2004 Location: Mumbai Posts: 304 Thanked: 12 Times	Forgot to mention the Lancer also has M3 style mirrors with Indicators as well as the Crystal Tail Lamps.
	() Thanks

8th September 2004, 22:54	#22
S600BENZ BHPian Join Date: Mar 2004 Location: Mumbai Posts: 304 Thanked: 12 Times	In retrospect even I feel the same about the tail lamps but the client insisted on them. So as the old saying goes "The Customer is always right(I guess)".
	(1) Thanks

8th September 2004, 22:58	#23
X-Machine Senior - BHPian Join Date: Jul 2004 Location: Mumbai/Tokyo Posts: 1,475 Thanked: 29 Times	Neat job apart from the tail-lamps. Looks good. Cya.
	(1) Thanks

13th September 2004, 17:02	#24
bhp BHPian Join Date: Jul 2004 Location: lokhandwala mumbai Posts: 839 Thanked: 170 Times View My Garage	all the ks cars are done at carmodernize . it is loacted in colaba and the job done there is fantastic
	() Thanks

31st January 2018, 02:01	#25
Kenneth Keymer BHPian Join Date: Feb 2015 Location: Mumbai Posts: 35 Thanked: 68 Times	Re: How much would an Evo-ish kit for the Lancer cost? I’m joining the party very late in the day, but could someone tell me how many of these shops are still open perchance? Also, how much would it cost in 2018 for an evo conversion?
	() Thanks

31st January 2018, 08:09	#26
greenhorn BANNED Join Date: Apr 2007 Location: KL-01 Posts: 7,878 Thanked: 4,910 Times View My Garage	Re: How much would an Evo-ish kit for the Lancer cost? Why spend good money to convert - I am sure one of these conversions should show up for sale much cheaper ( and you can use the money to clean up the mechanicals)
	() Thanks

7th February 2018, 19:26	#27
Sz-14 Newbie Join Date: Feb 2016 Location: Mumbai Posts: 7 Thanked: 7 Times	Lancer to evo 4 conversion Hello everyone. I am fairly new to the car scene, and lack knowledge about garages and tuners in Mumbai. I wanted to convert a lancer into a Evo IV (full conversion with 4wd, 4g63t engine, etc). However, I am a little unsure about how I should go about doing that. Searching on the forums revealed that KS Motorsports used to do the conversion, but they don't do it anymore. Any help/advice is appreciated. Also sorry if this was the wrong place to post this!
	() Thanks