Team-BHP (https://www.team-bhp.com/forum/)

-   Modifications & Accessories (https://www.team-bhp.com/forum/modifications-accessories/)

-   -   The 'Wiper Blade' Thread (https://www.team-bhp.com/forum/modifications-accessories/14555-wiper-blade-thread-83.html)

3M car care has the size for the Figo/Aspire as 22/16. And you are right, there is no mention of the wiper blade size anywhere in the manual. I even went to the extent of calling my Service Adviser. He too was clueless. Either 21/19 or 22/16 should be a good fit.

Are you on OE wiper blades now? If yes, then take a measuring tape and measure the blades. That is what was done for my car, when I did not know the original size. :D

I got Hella Curvo installed in my Figo today and I find it bulkier than the stock in terms of front visibility, which was one main reason I went for a replacement. Otherwise, the wipers are great and got it from a Bosch authorised dealer!

If anyone looking for 22" & 16" do let me know before I use it more. Else I will have to live with it. Can I remove the outer rubber protection/cover and use it? Is the rubber cover meant for aerodynamics?

So use a Hella Curvo (from a Bosch dealer) because it was bulkier ?

I had used Hella Curvo 22" 16" blades for my Ecosport before my current Unipoint wipers. I am looking for a replacement. The online store from where I used to buy blades is no longer there.

Where did you buy those blades from ?

The local Bosch authorized distributer had stock of Hella Curvo but not the Bosch Clear Advantage in 16". K K Diesels, Kottayam.

How much did you pay for these ?

I have taken measurement of the stock wipers of Ford Aspire TDCi.

It is 22"/16"

Replaced stock wipers after 5 years with Hella Curvo frameless wipers 20" (driver side) and 16" (passenger side). Results are really satisfactory.

I recently changed the wipers for my pre-owned Fortuner and while they work fine on low intermittent setting, the moment I turn to mid or high speed setting they start juddering and squeaking.

The auto parts guy has the frameless ones but based on feedback that it causes more pressure on the wiper motor I chose the frame-based ones. He only had Hella in stock and it being a brand name I decided to go ahead with it.

I wonder what the issue could be because they don't squeak or judder always, only on mid/high speed settings even if there's lot of rain. The juddering and squeaking definitely isn't because of less water. It was raining cats and dogs today but the wipers juddered.

Also, they don't judder at the first wipe, after about 10-15 wipes it starts juddering.

Has anybody been successful in sourcing a rear wiper (10") for Swift outside of the A.S.S. ? It is priced at Rs.500+ there , if it at all it is in stock, and is quite expensive for just the blade.

Please buy from any reputed automotive spare parts shop. What Maruti charges is hopeless.

For that money, you will get a pair of regular Bosch or Minda Wipers with frame.

Problem is, any wiper less than 12 inch in size is difficult to find. I was looking for 11 inch rear wiper for my ford figo. But could not find it anywhere. Checked online too, and no one in India was selling it there. Imported ones were costing a bomb.

Thanks Shipnil. Wasn't aware of that.

And knowing that rear wipers comes with a cover, I am sure one cannot fix a longer one too?

Wouldn't it be easy to cut a 12 inch wiper to 11 inches?
stupid:

Do you mean to cut the rubber blade part only? But the bracket with 12 inch one would still protrude and probably scratch the glass.

Actually, I did replace my 11 inch with a Bosch 12 inch. But the design was different which resulted in not so right installation. Hence on one side it is not touching the glass, reducing the wiping performance. Now, I am thinking of cutting the rubber blade of new wiper and putting it in the old wiper bracket. Not sure if I'd be able to do it right. Let's see.