My 250cc V-twin Kart Project

stuntfreak · 13th June 2013, 01:53

This was between my Engineering and Masters.

Had a few months, and a nice place to work.

So I built this with the Help of my Father.

Fully fabricated the Frame, Bearing housings, steering mechanism, Rear axle, Brakes, and other required essential components. Threw in the Engine from my Comet GT250 (Which then became an Electric Bike) and there it was. 27bhp high torquem 5 speed manual, fun and drift go kart. Did enjoy A LOT with it... Donated it to a college then later.

Cheers Guys!

Drive Safe!

Reinhard · 13th June 2013, 12:16

Hey - wonderful project really. Great craftsmanship & congratulations for it. A really kind gesture of donating it to the college too.

If you don't mind, could you share a few more detailed pictures? Of the actual mechanisms? Loved the fan on the (oil?) cooler most

. How do you change the gears by the way?
I'm really curious about how this beast of a cart sounded.

Perhaps you'll build a monster truck by the time you complete your studies.
Congratulations once again & good luck!

manolin · 13th June 2013, 12:24

Was there too much heat because of the engine being by the side of the driver?

stuntfreak · 14th June 2013, 18:42

Quote:

Originally Posted by Reinhard

Hey - wonderful project really. Great craftsmanship & congratulations for it. A really kind gesture of donating it to the college too.

If you don't mind, could you share a few more detailed pictures? Of the actual mechanisms? Loved the fan on the (oil?) cooler most

. How do you change the gears by the way?
I'm really curious about how this beast of a cart sounded.

Perhaps you'll build a monster truck by the time you complete your studies.
Congratulations once again & good luck!

Thanks a lot indeed! Yes the oil cooler fan was very effective.

I had the following mechanism (Picture attached) to shift Gears. Was easy and fun!.

I'm done studying and have started up my own place to build crazy things now. Anyways, the car sounded real nice! You can check its performance on this link:

http://www.youtube.com/watch?v=Uyt5o9R2fug

Cheers mate!

PS : I'm sorry. No seatbelt or Helmet in the Video! Please always wear safety gear.

Quote:

Originally Posted by manolin

Was there too much heat because of the engine being by the side of the driver?

Well it use to be warm, but never got any burns and such. specially with a jacket on, you could'nt feel the heat at all. Enjoy the video!

Drive safe! Always wear a Seatbelt!

13th June 2013, 01:53	#1
stuntfreak BHPian Join Date: May 2005 Location: Pune Posts: 212 Thanked: 1,571 Times	My 250cc V-twin Kart Project This was between my Engineering and Masters. Had a few months, and a nice place to work. So I built this with the Help of my Father. Fully fabricated the Frame, Bearing housings, steering mechanism, Rear axle, Brakes, and other required essential components. Threw in the Engine from my Comet GT250 (Which then became an Electric Bike) and there it was. 27bhp high torquem 5 speed manual, fun and drift go kart. Did enjoy A LOT with it... Donated it to a college then later. Cheers Guys! Drive Safe! Attached Thumbnails
	(9) Thanks

13th June 2013, 12:16	#2
Reinhard Distinguished - BHPian Join Date: Nov 2010 Location: Pune Posts: 4,873 Thanked: 17,844 Times View My Garage	re: My 250cc V-twin Kart Project Hey - wonderful project really. Great craftsmanship & congratulations for it. A really kind gesture of donating it to the college too. If you don't mind, could you share a few more detailed pictures? Of the actual mechanisms? Loved the fan on the (oil?) cooler most . How do you change the gears by the way? I'm really curious about how this beast of a cart sounded. Perhaps you'll build a monster truck by the time you complete your studies. Congratulations once again & good luck!
	() Thanks

13th June 2013, 12:24	#3
manolin BHPian Join Date: Oct 2008 Location: Delhi/Cuttack Posts: 392 Thanked: 206 Times	re: My 250cc V-twin Kart Project Was there too much heat because of the engine being by the side of the driver?
	() Thanks