[noelravin]

I will post these pictures of the nudge guard fitment over the weekend. Its a very simple installation but needs the upper bracket as well which in my case also holds the fog lamps. If you dont have additional fog lamps you will still need to make this bracket of the same shape.

[noelravin]

Hi Gurha. Did you finally buy the hella lamps?

[gurha]

Originally Posted by noelravin

Hi Gurha. Did you finally buy the hella lamps?

No, I've currently upgraded my lamps to 80/100, so I've dropped the plan to upgrade to Hella because of money constraint and also because I couldn't decide where to put those lamps.

Will probably be upgrading my lamps after some time.

Thanks.

[KALSANKRPAI]

[quote=joshguy;2992894]I assume Udupi is in Halls road and you are talking about that.In simple words i would say follow the roads given below.This is the simplest road as you are new to chennai

I would like to know whether the Malar Hospital is near Adayar Anand Bhawan,
below the flyover {Lattice Bridge }

[joshguy]

[quote=KALSANKRPAI;3277645]

Originally Posted by joshguy

I assume Udupi is in Halls road and you are talking about that.In simple words i would say follow the roads given below.This is the simplest road as you are new to chennai

I would like to know whether the Malar Hospital is near Adayar Anand Bhawan,
below the flyover {Lattice Bridge }

Yes ,this shop is just diagonally opposite to MALAR hospital and now there is a new landmark,its just two shops from MERCY Electronics

[valapad]

Thanks for sharing noelravin..Very use full Guide

some pics of my Duster Hella's

[JoseVijay]

Originally Posted by valapad

Thanks for sharing noelravin..Very use full Guide

some pics of my Duster Hella's

Very clean, neat and superb job done on your Duster. Those smoking hot alloys add beauty to the car.

[noelravin]

Hi Valapad. Nice work. The paint on your car has a fantastic shine . . . . what coat have you given it?

[rakesh_r]

Neat looking duster I say.Can anyone tell me the difference between the HElla rally 3003 and HElla rally 3003 compact?

[epijay]

Slightly off topic, but on the topic of lights on the front bumper, I am planning to install these Osram Fog/DRLs this weekend http://www.osram.com/osram_com/produ...-fog/index.jsp

Also, a 20" spot / diffuse light ( Sunyee, EBAY) in the center using the clamps technique described here (thanks NoelRavin) perhaps I'll take a few pics and post here should anyone be interested..

[epijay]

Originally Posted by epijay

Slightly off topic, but on the topic of lights on the front bumper, I am planning to install these Osram Fog/DRLs this weekend http://www.osram.com/osram_com/produ...-fog/index.jsp

Also, a 20" spot / diffuse light ( Sunyee, EBAY) in the center using the clamps technique described here (thanks NoelRavin) perhaps I'll take a few pics and post here should anyone be interested..

This past weekend, I did just this- Bar light and Osram Fogs... The bar light is AWESOME- Helps avoid squashing some poor soul, pedestrian or ill lit two-wheeler, on the left side of a dark road with blinding onslaught of high beams from the right side

[divyankar]

Originally Posted by epijay

This past weekend, I did just this- Bar light and Osram Fogs... The bar light is AWESOME- Helps avoid squashing some poor soul, pedestrian or ill lit two-wheeler, on the left side of a dark road with blinding onslaught of high beams from the right side

Just wow!!!
Bar light is looking awesome, can you please share the specs and pricing for both (grill as well)
And is the bar light improves visibility or it’s just a DRL.
I was also planning for the front grill but was not sure how it will look, but now I will get that done ASAP.

[epijay]

Hi Divyankar, I got the bar light from Ebay..http://www.ebay.com/itm/261412578276...%3AMEBIDX%3AIT I found this light to be well made (robust Lexan plastic on front) and about 1/5 the cost of a "standard high quality" bar light from Rigid Industries. Baja industries in the US have these lights at over $800 each, but time will tell whether these are worth the 1/5th - 1/8th price charged by the industry leaders. It is wired directly to the battery via a relay and switch, both of which they provide. The light is pretty bright and throws a beam further than the high beams of my Osram Nightbreaker halogen bulbs. As for the Grill, I got it from my local purveyor of car goodies, the Pit Stop in Hyderabad - I think I paid INR 6K for it.

[divyankar]

Originally Posted by epijay

Hi Divyankar, I got the bar light from Ebay..http://www.ebay.com/itm/261412578276...%3AMEBIDX%3AIT I found this light to be well made (robust Lexan plastic on front) and about 1/5 the cost of a "standard high quality" bar light from Rigid Industries. Baja industries in the US have these lights at over $800 each, but time will tell whether these are worth the 1/5th - 1/8th price charged by the industry leaders. It is wired directly to the battery via a relay and switch, both of which they provide. The light is pretty bright and throws a beam further than the high beams of my Osram Nightbreaker halogen bulbs. As for the Grill, I got it from my local purveyor of car goodies, the Pit Stop in Hyderabad - I think I paid INR 6K for it.

Thanks for the info.
Can you please also share the experience with fog lamp. Is it performing better than stocks?

[divyankar]

Sharing some pics of my Duster with Osram Hids (Low beams)