Hey Bumblebee86


Thankx for this detailed report it has been covered very well.

-Dodge Challenger wearing a Charger Daytona costume
-5.7-liter HEMI V8

- red exterior is actually leather
- The "stickers" on the front fenders are actually stitched in.

- IS 350C by Fox Marketing; Foxy Green paint
- supercharger + 3.5-liter V6 = six pounds of boost & 405 hp
- no less than 11 custom body panels, including a Foxy Green Lexus badge







- IS 350 C by Auto Salon and JTuned.com
- matte red with a touch of black
- no supercharger; $15,000 worth of mods, a custom intake, exhaust and air filter.
- reworked fuel mapping schema; new throttle system
- running on Hankooks






- 0-60 and Design Craft Fabrication's custom IS 250 C
- KW coilover setup, chipped ECU, tuned exhaust and custom Brembos stopping one-piece Advan racing wheels
- Pontiac G8 looking twin hood vents

- 1974 Bolus & Snopes Civic 1200 racecar
- scored six SCCA GT5 championships between 1985 and 1990
- once held the title of "World's Fastest Civic"; 146.698 MPH on the Talladega Superspeedway in 1976

- $1,395 original sticker price
- 598 cc air-cooled two-cylinder puts out 36 hp
- tops at 80 MPH and returns 40 MPG.
- the car that introduced Americans to Honda automobiles

- sported a body kit designed for high speed stability, engine mods, a totally reworked suspension, and 13-inch tires

PRESS RELEASE

DEARBORN, Mich., – Hot rodders have always lived by the motto "There's no replacement for displacement," indicating that the more cubic inches an engine has, the better the resulting performance. Ford Powertrain and Detroit Street Rods are out to prove that thinking out-of-date with their EcoBoost™-powered '34 Ford hot rod.

To be introduced at this year's Specialty Equipment Market Association (SEMA) show, the Ford hot rod will be the "first" rear-wheel-drive application of the 3.5-liter twin-turbo EcoBoost V-6 delivering an estimated 400 horsepower and 400 ft.-lb. of torque – power numbers that easily rival a typical hot rod's 302-cubic-inch V-8 or even a modern-day V-8 of similar size.



"EcoBoost technology shows that there is a viable replacement for displacement," said Dan Kapp, director of Ford Powertrain Research and Advanced Engineering, who will be part of a SEMA "Driving Green" technology briefing panel discussion during the show. "As consumers' demand for fuel efficiency continues to grow, and our commitment to delivering best-in-class fuel economy remains steadfast, it's important to show that performance does not need to suffer as a result."

"Hot rod builds provide blank canvases for SEMA member companies and SEMA is uniquely positioned to demonstrate that horsepower and green power can coexist without sacrificing performance or the cool factor," said John Waraniak, SEMA vice president of Vehicle Technology. "This '34 EcoBoost hot rod is a fantastic example of modern green technology being applied in a manner that any performance enthusiast would love."

The EcoBoost family of engines uses turbocharging and direct injection technology to deliver up to 20 percent better fuel economy and up to 15 percent fewer CO2 emissions versus larger-displacement engines.

"The beauty of EcoBoost is that it enables us to downsize for fuel efficiency, yet boost for power," said Kapp. "We're able to decrease the size of the available engine – such as installing a V-6 versus a V-8 – yet boost the power using turbocharging to deliver similar power and torque to that larger engine."

The first EcoBoost engine, a 3.5-liter twin-turbo V-6, launched this year on the 2010 Ford Taurus SHO and Flex and on the Lincoln MKS and Lincoln MKT. The EcoBoost V-6 produces 355 horsepower (365 hp in the Taurus SHO) and 350 ft.-lb. of torque.



Ford has recently announced the first four-cylinder EcoBoost engines, launching in global applications beginning next year. The 1.6-liter EcoBoost I-4 first arrives in Europe, followed by the 2.0-liter EcoBoost I-4 launching on products in both Europe and North America.

Going forward, Ford will shift its powertrain strategy to be built around EcoBoost technology. Under the new system:

* A 3.5-liter EcoBoost V-6 would replace naturally aspirated V-8 engines
* A 2.0-liter EcoBoost I-4 would replace naturally aspirated V-6 engines
* A 1.6-liter EcoBoost I-4 would replace naturally aspirated large I-4 engines

Following the launches of the new EcoBoost I-4s will be the extension of the 3.5-liter V-6 to the first rear-wheel-drive configuration in the F-150 pickup truck late next year. Another global application, the Ford Falcon sedan in Australia, will receive a rear-wheel-drive version of the 2.0-liter EcoBoost I-4 in 2011.




The fun-to-drive nature of EcoBoost engines is leading Ford to introduce these fuel-saving powertrains in large volumes virtually across its lineup. For example, by 2013 more than 90 percent of Ford's North American lineup will be available with EcoBoost technology, and nearly 80 percent of Ford's global nameplates will have an available EcoBoost option.

By 2013, global EcoBoost volume throughout the Ford, Lincoln and Mercury vehicle family is expected to be 1.3 million units, with up to 750,000 sales coming from North America alone.




'34 Ford EcoBoost hot rod project
Detroit Street Rods' latest build is a 1934 Ford and is a joint venture with Ford Motor Company and Experi-metal. In this '34 application, the EcoBoost engine is configured for rear-wheel drive and is coupled with a Tremec five-speed manual transmission.

"The decision to use the EcoBoost engine for our powertrain on this project was an easy one in that it gave us the opportunity to combine the iconic '34 Ford sculpted body lines with the advanced technology of the EcoBoost powerplant," stated Robert Smith, president of Detroit Street Rods. "The result is the perfect hot rod marriage of advanced technology for power and legendary automobile design."

While the stock Honeywell turbochargers that drive the EcoBoost engine are used, they were repackaged to fit the engine bay of this all-steel replica body. The engine configuration and turbocharger packaging was dynamometer tested by Ford Powertrain for proper calibration of the engine electronic control module (ECM). In addition to the all-stock engine, other components including the fuel pump, ECM, fuel pump module, fuel pump processor and drive-by-wire throttle were utilized in their original production configuration.




The body is from Steve's Auto Restoration and is the recently released 1934 Ford 3-Window coupe. The complete body and fenders are from brand-new tooling, and are designed, stamped and manufactured by Experi-metal in Sterling Heights, Mich. This "replica" '34 features all-steel construction, full fenders, running boards, electronic power windows, air conditioning and custom bumpers.

The engine was repackaged and fitted with an engine plate adapter to mate with an aluminum flywheel, performance clutch and a Tremec TKO five-speed transmission. The turbochargers were repositioned to the front of the cylinder heads and custom aluminum tubing was used to route the air from the custom air cleaner through the air-to-air intercooler. The exhaust gases are routed from the cylinder heads through coated headers, through the stock wastegates, and pass through large custom exhaust cones located outside the engine bay and just above the front fenders.

PRESS RELEASE

2010 COBRA JET MUSTANG CONTINUES THE EVOLUTION OF TURNKEY RACE CAR PROGRAM

LAS VEGAS – Since its victorious introduction at the NHRA Winternationals in 1968, Ford's Cobra Jet Mustang has created a legacy of power, performance and triumph.

The 40th Anniversary 2008 Cobra Jet Mustang lived up to the legend of the original, duplicating the NHRA Winternationals victory in 2009 and dominating drag strips across the land.

Today, Ford Racing unveiled the 2010 Cobra Jet Mustang at the Specialty Equipment Market Association (SEMA) show, which marks the continued evolution of the CJ as a factory-produced turnkey race car. In honor of the SEMA introduction, Ford Racing built and unveiled a one-of-a-kind "SEMA Special" silver Cobra Jet complete with a charcoal Cobra Jet graphics package.





"The 2008 Cobra Jet was a great car, it did everything we wanted it to do," said Brian Wolfe, director, Ford North American Motorsports. "We're really proud of the car, but then again we're always trying to make the next one better.


"With the 2010 Cobra Jet, we had the luxury of a longer development cycle and the result is absolutely stunning. Where the 2008 Cobra Jet was an extremely potent starting point for NHRA Stock competition, the 2010 will enhance the car further. We are all excited to see the new Cobra Jet in competition."

For decades, the Mustang has been the preeminent car in many forms of racing, including drag racing. The 2008 Cobra Jet Mustang added to that legacy this season with high- profile wins at the NHRA Winternationals and U.S. Nationals, and by setting numerous track records across the country.

The 2010 Cobra Jet, like its predecessor, is a factory-built race car that is intended for NHRA Stock and Super Stock racing. The goal for the 2010 Cobra Jet was to enhance the race features to further make its own place in NHRA history. The 2010 CJ will come with all of the features of the 2008 car with enhancements that include options for a full race-prepared automatic or manual transmission, drag race-specific shocks and springs, manual steering and brakes, 8.50 certified rollcage, and an Aeromitive return-style fuel system with trunk-mounted fuel cell.





Additionally Ford Racing engineers have developed for the 2010 Cobra Jet a factory-first launch control/rev limiter that will allow drivers to preset the rpm after they stage the car. When they are ready to leave, all they do is put the throttle pedal to the floor; they don't have the engine speed to free rev. Previously, the launch control/rev limiter was only available as an aftermarket option.

Much like Ford Racing's previous Mustang FR500S race car, the Cobra Jet Mustang will get its start at the Auto Alliance International (AAI) assembly plant in Flat Rock, Mich. The entire 50-car run of 2010 Cobra Jets will be built on the same production line that produces the 2010 Ford Mustang production car. Production of Cobra Jets will commence in January, with delivery of all vehicles expected in the first quarter of 2010.

All of the additional parts and pieces for the CJ can be found in the Ford Performance Parts catalog. And since the Cobra Jet is produced from a base V-6 Mustang, any consumer can turn his Mustang into a Cobra Jet by purchasing the parts from the Ford Performance Parts catalog.

The 2010 CJ car features a choice for customers between two supercharged engines or three normally aspirated engines (pending NHRA approval). These options will allow the Cobra Jet to be eligible for more classes in the NHRA, as well as competition with other sanctioning bodies, including NMRA, NMCA, PSCA and IHRA.
All 50 of the 2010 Cobra Jet Mustangs have already been ordered by Ford dealers for delivery to customers. For those customers who missed out on the limited run of 2010 Cobra Jets, Ford Racing has set a goal to provide future versions of the Cobra Jet.

PRESS RELEASE

Silverado ZR2 concept

At a glance, it's clear the Silverado ZR2 concept wasn't designed to haul flowers back from the nursery. With its widened body, tall stance and powerful LS supercharged engine, it is ready to hit the berms, dry washes and gullies of the Baja Peninsula.





The Silverado ZR2 is based on an extended cab/short box body. The custom bodywork includes carbon fiber fender flares that stretch outward to cover the 35-inch-tall Goodyear Wrangler off-road tires and widened stance. Much of the truck's body is made of carbon fiber, including the front fenders, extractor-style hood, rocker extensions and tailgate, which features large, debossed CHEVROLET lettering as a nod to Chevy trucks of the past.



The pickup box, which is protected with a spray-on liner, features a unique locking storage system mounted to the extruded aluminum Cargo Management System rails from Chevy Accessories.





Many of the carbon fiber parts, including the hood, are clear-coated, rather than painted, to show off the intricate weave pattern of the high-tech, lightweight material. The parts that aren't clear carbon fiber are painted Dune Metallic, a color that blends with the desert terrain. A large, more prominent grille is also part of the package and is a vision of what designers would like to see in a production or accessory part. It is very functional, feeding cool air to the 550-horsepower LS supercharged crate engine from GM Performance Parts.



The combination of 20-inch BBS RD wheels – reminiscent of historic Chevy truck wheel – and aggressive Goodyear Wrangler MT/R tires connect to the chassis via BDS shocks and a four-inch lift kit to help negotiate those desert trails. The new front fascia dramatically improves approach angle and skid plates protect the chassis.



The interior features more carbon fiber details on the dash, along with black leather and suede-trimmed seats with contrasting stitching to those trail runs more comfortable.

"There's more to this concept than meets the eye," said Dewar. "Some of the components are being explored for possible inclusion in upcoming models."