I was just reading this month's top gear and was quite overwhelmed by the rich heritage of the Suzuki Alto. (nee ss40, 800, zen, esteem, alto AND a-star: all are peas of the same pod)
May, 1967 saw the introduction of the Suzuki Fronte 360 2-door sedan with the engine at the rear. The wheelbase was down to 196 cm, the suspension independent with coil springs and the engine a 356 cc 3-cylinder air-cooled 2-cycle, placed transversely. Its overall shape had a roundish profile, nicknamed 'Daruma', a Japanese roly-poly doll, and this is the smallest (and only Kei) car which used the cola-bottle shape, that became popular in the USA for the 1965 model year. In November, 1968 came the Suzuki Fronte SS 360 with 36 HP, with the Suzuki Fronte SSS to follow in April, 1970. In the export there was also a Suzuki Fronte 500 with the engine enlarged to 475 cc since January, 1969.
Also in March, 1969 as a successor to the Suzulight Van arrived the Suzuki Fronte Van 2-door wagon with a conventional drivetrain lay-out (engine in front, rear wheel drive), with a rear rigid axle with leaf springs and a wheelbase of 199.5 cm. The engine was the air-cooled 3-cylinder 2-cycle 356 cc. By July, 1969 a less commercial version arrived as Suzuki Fronte Estate possibly to give the car buyer a model with more luggage room without having to buy a commercial version. In June, 1970 this model was succeeded by the Suzuki Fronte Custom with the same wagon body style but without a rear hatch, there was a bottom-hinged trunk lid only, possibly to please the customer (who found too few luggage room in the rear-engined Fronte) in disguising the fact that actually a wagon (not popular in those days) was involved. This might be the only wagon ever with a fixed back window; this model was deleted in 1971 (after the addition of a more luxury version, called the Fronte Hi-Custom in August, 1970). Also in June, 1970 became available a wagon with a 2-piece tailgate, next to the top-hinged one-piece version. By the 1973 model year the engine in the Suzuki Fronte Van became a 2-cylinder 2-cycle water-cooled 359 cc.
Here's a pictorial on how the model evolved from the late 70's, till date.
Still with rear engine came in November, 1970 the second generation Suzuki Fronte 71 2-door sedan with a wheelbase of 201 cm. Suspension remained the same, by May, 1971 there was also a water-cooled version of the engine. Again there were SS, SSS and SSSR versions with the 36 HP engine. By November 1971, the cars were called Suzuki Fronte 72. Based on this vehicle came in September, 1971 the Giugiaro-designed Suzuki Fronte Coupe 2-door to be had with the water-cooled engine only. This car would be deleted in 1976 and was resurrected in revised form in October, 1977 (see Suzuki Cervo). In the export there was the Suzuki Fronte 500 with 475 cc engine, also known as Suzuki LC50. The coupe was named Suzuki LC10 in the export.
In April, 1973 as a successor to the Suzuki Fronte Van came the Suzuki Fronte Hatch with the same drivetrain lay-out and engine, now with a wheelbase of 200.5 cm. The Fronte name would disappear from the vehicle by December, 1974. In the export the vehicle was known as Suzuki LS30, by 1976 Suzuki LS20 with rear side window panels. In July, 1976 the length was extended to 319 cm and the wheelbase to 210 cm with the front end after the axle being enlarged by using the grown 539 cc engine with an extra third cylinder. This vehicle was named Suzuki Fronte Hatch 55 and would be succeeded in 1979 by the Suzuki Alto.
The 1st generation (SS40) was a 3-door version of the 4-door
Fronte. The Alto used a 543-cc 3-cylinder engine producing 28 hp (21 kW). In addition to the Alto and Fronte, a 3-door coupé (
Cervo) and a 2-door pick-up (MightyBoy) were also available.
The 2nd generation (CA71/72) was introduced in 1984. It continued with the SS40's engine, but was also available with turbocharged and multi-valve engines. A 5-door body (identical to the Fronte's) became available in 1985. A Cervo on the SS71 base was introduced in 1988, with a new 547-cc engine.
The 3rd generation (CL11/21/22) replaced the CA71 in 1988. It had strikingly angular styling, with an unusual glazed C-pillar on the 5-door. Initially it used the SS71 Cervo's engine, but when the kei-car standards were changed in 1990 the capacity was increased to 657 cc. This was the last generation of Alto to have an associated Fronte model. An unusual feature of this generation was the availability of a version with sliding doors, the Slide Slim, intended to make it easier to enter and exit in tight spaces. Suzuki also produced a version (the Hustle) with a high roof behind the front seats, which was unusual in that it used a modification of the Alto's body rather than a completely new body; this made it possible to link the Hustle with the Alto, but made the styling rather unharmonious. Its appearance was similar to the
Nissan AD Max van
The 4th generation (HA11) appeared in 1994. The 657-cc engines were joined by a new high-performance 658-cc. The styling displays an interesting blend of features: the
tailgate and rear doors are still fairly angular, but the front is beginning to be more rounded - a trend which would be continued in later years.
The 5th generation Alto (HA12/22) was introduced in 1998 (the one running on our roads, presently AS the Alto) The styling was generally more rounded, the shape of the cabin showing the Alto's relationship with the new Kei. The 658-cc engine was produced in a version without a turbocharger, joining the turbocharged version and the 657-cc engines. Several derivatives were produced from this generation. Suzuki produced two "classic-style" versions: the Alto C with a deep chrome grille and a curious headlamp arrangement by which circular main lamps were joined with ovoid sidelights and indicators, which was shared with the Alto Works; and the Alto C2 which had separate headlamps and sidelights and a wider grille.
Mazda also sold the standard Alto as the
Carol, and
Mitsuoka used the Carol as a basis for their Ray.
The 6th generation (HA24) was introduced in 2004. The bonnet and headlamps curved down at the front, giving a similar effect to the
Toyota WiLL Vi or the
Citroen C2. The Alto was re-aligned within the range to accommodate new models such as the
Cervo and
Alto Lapin. In Japan, this version of the Alto was rebadged as the
Nissan Pino and the Mazda Carol.
Seventh Gen Alto is our very own A-Star!
Inspired by Top Gear, and information from Wikipedia (some of which was wrong, so edited it here)
PLEASE feel free to add as much information as you possibly can. I'd love to peek into the history of the Alto as much as I possibly can!