Team-BHP - DIY: Hardwiring your Dashcam
Team-BHP

Team-BHP (https://www.team-bhp.com/forum/)
-   DIY - Do it yourself (https://www.team-bhp.com/forum/diy-do-yourself/)
-   -   DIY: Hardwiring your Dashcam (https://www.team-bhp.com/forum/diy-do-yourself/167284-diy-hardwiring-your-dashcam-2.html)

Quote:

Originally Posted by arunphilip (Post 3784138)
Thank you for your kind words Jim. I did laugh at your question about rattling - it takes a fellow EcoSport owner to relate to and worry about rattles in the plastic :D! So firstly, yes, I did all the work myself, unaided. The dashboard and side panel are well equipped with clips that come off and latch back on cleanly, so it was easy, and no damage was caused. I've not faced any rattles, so that too seems to be fine (phew!). Again, the clips ensure that alignment is perfect - once it snaps back in place, its like a factory fit, there's no dependence on the DIYer to carefully align panels. Its like Lego!

Great to know Arun.

I had visited the Ford Service at least 4 times on a same rattling noise. They removed the dash and has now been cleared. They also told me about the complexity of the same.

(Next time I will show they your post)

I had a dashboard episode with my XUV5OO. After fixing it back, I can see a few panel gaps. Plastic quality on the Ecosport is far above what I have on the Mahindra, so just wanted to get that side clarified.

Quote:

Originally Posted by batterylow (Post 3783648)
Great Work!

I just bought this a few days earlier and was wondering how to power it without utilizing the only cigarette lighter socket available.

http://www.snapdeal.com/product/blau...g/656059560877

Batterylow, where's this cam fixed on the dash. Planning to get one and wondering where the ideal spot would be. Can you post a pic for us?

Quote:

Originally Posted by pranxter (Post 3784220)
Batterylow, where's this cam fixed on the dash. Planning to get one and wondering where the ideal spot would be. Can you post a pic for us?

See this post: http://www.team-bhp.com/forum/produc...ml#post3778172

Quote:

Originally Posted by pranxter (Post 3784220)
Batterylow, where's this cam fixed on the dash. Planning to get one and wondering where the ideal spot would be. Can you post a pic for us?

Quote:

Originally Posted by arunphilip (Post 3784224)

Hi Pranxter, I have also placed it in the same place as arunphilip has mentioned. I have still not used it as I do not want to use the only charging socket I have in my car. I need to get another socket done to keep the dash cam charged all the time.

Hi! Greetings to all.
This is a very interesting article.
I did have the installation of a Dashboard Cam.
Model : Sony Actioncam.
New models :http://www.sony.net/Products/actionc...?contentsTop=1

You can mount the cam using:Universal GPS NAV-MAT II
Make: Bracketron Inc.

You can control the Sony cam using your Android phone.

PS: Do not leave the rubber mat exposed to the sun, for extended periods.
The same goes for the cam. Retrieve the setup after your trip. One of the reasons is theft.

Neat (and I mean neat, as in clean and tidy) tutorial, Arun! You should be writing a book on DIY for us! Keep them coming.

Here is an idea I toyed with, but gave up after realizing the effort required to hunt down parts in Bengaluru:

Why not connect it to the 12V supply at the cabin-light near the mirror? (Of course, it would not be triggered by the ignition switch).

Quote:

Originally Posted by arunphilip (Post 3782714)
Procedure for Hard-Wiring

Great thread. This is something I am going to try out. I have a Tom Tom GPS unit which I will Hardwire. While at it I will also buy a Dashcam and fit it.

Quote:

Originally Posted by joednazareth (Post 3784540)
You can mount the cam using:Universal GPS NAV-MAT II
Make: Bracketron Inc.

Where did you buy this from?

Now coming to my question. Don't know if this is the right place to post. I would like to "Hardsecure" the GPS and Dashcam units. As you know these units usually come with a suction cup but invariably the unit falls off sooner or later. Now I don't want it to be permanently secured as I will have to remove the unit sometimes for updates etc. Looking for an option with some kind of twist lock or screws etc. It has to be neat and not spoil the looks of the interiors. Any suggestions?

Quote:

Originally Posted by pedrolourenco (Post 3787562)
I would like to "Hardsecure" the GPS and Dashcam units. As you know these units usually come with a suction cup but invariably the unit falls off sooner or later. Now I don't want it to be permanently secured as I will have to remove the unit sometimes for updates etc. Looking for an option with some kind of twist lock or screws etc. It has to be neat and not spoil the looks of the interiors. Any suggestions?

My Garmin dashcam came with an adhesive mount, out of the box. The dashcam fits to the mount via a spring-loaded ball joint, so I can remove the camera if required, for updates, or when giving the car for servicing.

If you remove the adhesive part from the windshield (e.g. if you sell the car), you can always secure it back using 3M double-sided tape.

If you want something that is even less permanent, then you can look for slide-on mounts like this mount that fits on the sun visor. This has the same ball joint that my Garmin uses.

You can also consider these 3 mounts from Arkon, which are compatible with TomTom.

Quote:

Originally Posted by pedrolourenco (Post 3787562)
Great thread. This is something I am going to try out. I have a Tom Tom GPS unit which I will Hardwire. While at it I will also buy a Dashcam and fit it.


Where did you buy this from?

http://www.amazon.com/Bracketron-UFM...6DQP6CDPFR99K7

Now coming to my question. Don't know if this is the right place to post. I would like to "Hardsecure" the GPS and Dashcam units. As you know these units usually come with a suction cup but invariably the unit falls off sooner or later. Now I don't want it to be permanently secured as I will have to remove the unit sometimes for updates etc. Looking for an option with some kind of twist lock or screws etc. It has to be neat and not spoil the looks of the interiors. Any suggestions?

1. Dash cam with day night infrared 940 nanometer (used in TV remotes ), mounted behind rear view mirror. Wiring can be hidden inside cabin roof lining, also recording angle not less than 120 degree .
2. GPS can be mounted on the Dash. Easy to install and remove. You will tempt someone to break in and steal, if you parked your car and left for the day. Also the heat inside the cabin will bamage your GPS & rubber pad.
Regards,
Joe

Very nice and detailed instructions. Thanks.

This summer vacations when i went to Badrinathji, my children refused to go but they wanted to see the scenery 'online' through dash cam in my Innova.

Since then I've been trying to find a way of setting up a WiFi real time transmission of data like this :

WiFi Dash cam ---> mini 3G router in car ----> Internet ------> Monitor from anywhere including home in real time.

A kind of ip dash cam!

Since 3G operators (including BSNL/MTNL/AirTel) do not allow public I.P addresses (or DDNS), it very difficult to "push" data from behind 3G router while quite easy to "pull' data.

So only option, perhaps, remains a VPN.

Any thoughts?

Quote:

Originally Posted by DwarkaDelhiWala (Post 3788187)
This summer vacations when i went to Badrinathji, my children refused to go but they wanted to see the scenery 'online' through dash cam in my Innova.
...
Any thoughts?

The simplest solution I can think of is Skype! Mount your phone as a dashcam, call on Skype using the phone's own 3g connection. Cuts out the need of additional h/w. Your dashcam can continue to focus on recording the journey in case you want to view the footage later. Just my thought :).

Quote:

Originally Posted by joednazareth (Post 3787894)
2. GPS can be mounted on the Dash. Easy to install and remove. You will tempt someone to break in and steal, if you parked your car and left for the day. Also the heat inside the cabin will bamage your GPS & rubber pad.
Regards,
Joe

I would want it to be removed when parking in an unsafe area. However I want it to be secure when I am driving. This is the problem I'm having with the suction cup.

Quote:

Originally Posted by pedrolourenco (Post 3788221)
I would want it to be removed when parking in an unsafe area. However I want it to be secure when I am driving. This is the problem I'm having with the suction cup.

I believe you can go for the soft GPS NAV-MAT II, There is also a YouTube Demo video. Once you peal it off save it in a zip lock clear plastic bag. To save the glue from attracting dust.
Regards,
Joe

Quote:

Originally Posted by DwarkaDelhiWala (Post 3788187)
...This summer vacations when i went to Badrinathji, my children refused to go but they wanted to see the scenery 'online' through dash cam in my Innova.
...
Any thoughts?

You can also use Meerkat or Periscope on your phone to live stream the video.

IIRC Those apps have an option to save the stream video too.

All this while you can focus just on driving.

If still hesitant, an App called DailyRoads can record the drive video in the background.

Rgds & Drive safe!

Thanks for initiating this useful thread. The detailed and step by step instructions mentioned, are very helpful and exhaustive, that even a layman can try out the installation. With more and more travel enthusiasts embarking on road trips than ever before, the dash cams are gaining popularity by the day.


All times are GMT +5.5. The time now is 15:06.