Here are the specs, got them from the company:
GASOLINE ENGINE
GM ECOTEC Engine (Standard equipment)
210H.P, 195 Ft Lbs. Torque (
est.)
Type: In-line four cylinder
Displacement: 2401 cc (2.4L)
Compression ratio: 10.0:1
Bore x stroke: 86.00 x 96.00mm
Fuel system: sequential fuel injection
Rev Limit: 6000 rpm
Block: cast aluminum
Cylinder head: cast aluminum
Intake manifold: composite
Connecting rods: forged powder metal
Complete AN Fitted Fuel System
Cad designed motor mounts
COOLING SYSTEM
Purpose-builICON CJ3B Specifications
t high density core cross flow alloy radiator.
Waterproof electric dual fans, fan shroud.
EXHAUST SYSTEM
OE cast iron high flow manifold into a custom single exit 2” computer controlled mandrel bent stainless steel exhaust system with Magnaflow high flow, low noise level muffler.
Laser cut copper gaskets at three bolt 3/16” flanges.
Ceramic coating in matte grey enhance exhaust tone and longevity.
INTAKE SYSTEM
Isolated K&N element filter in a dry sock (for adverse conditions) upon a mandrel bent alloy plenum.
TRANSMISSION
Five Speed Aisin-Warner AX15 Manual transmission (standard equipment)
McLeod/OEM GM hydraulic clutch system
Model. . . . . . . . . . . . . . . . . . . . . . . 52108118AB
Synchronization. . . . . . . . . . . . . . . . All Gears
Main Case. . . . . . . . . . . . . . . . . . . . .Cast Aluminum
Shift Cover . . . . . . . . . . . . . . . . . . . Aluminum alloy
Gear Bearing. . . . . . . . . . . . . . . . . . Caged roller
Gears. . . . . . . . . . . . . . . . . . . . . . . . Helically cut
Lubrication. . . . . . . . . . . . . . . . . . . . .DCX#4761839AC
Oil Capacity. . . . . . . . . . . . . . . . . . . .3.25 quarts
Gear ratios:
1st. . . . . . . . . . . . . . . . . . . .. . 3.83:1
2nd . . . . . . . . . . . . . . . . . . . . 2.33:1
3rd . . . . . . . . . . . . . . . . . . . . . 1.44:1
4th . . . . . . . . . . . . . . . . . . . . . 1.00:1
5th . . . . . . . . . . . . . . . . . . . . . . .79:1
Reverse . . . . . . . . . . . . . . . . . 5.04:1
TRANSFER CASE
New OEM Production spec New Process NP231 transfer case is competition proven and freeway friendly, too.
Featuring shift on the fly 4 capability high range 4x4, 2.72 low range, and massive international parts support.
Novak Improved shift controller.
Advance Adapters Slip Yoke Eliminator.
Case: Cast Aluminum Alloy
Weight: 86 lbs. (dry)
Ratios:
Low Range: 2.72:1
High Range: 1:1
FRAME
Hand crafted 2"x4"x 0.140" mandrel-bent mild steel rails utilize state of the art bending technology to create a rigid, wrinkle-free frame rail. All accessory mounts are precision laser cut and formed to exact dimensions. Chassis-specific jig tables are used, and all welding is completed by certified welders.
AXLES & DIFFERENTIALS
Custom width Production Jeep Rubicon based solid axle assemblies.
4.10:1 ratio.
1/2 Ton driveshafts, with 1310 joints, high strength steel shaft bodies.
Rear CV joint.
Electric locking differentials standard equipment.
Three position illuminated locker control switch located on dash.
SUSPENSION SYSTEM
Platform specific design featuring estimated 9” true wheel travel front and rear..
Four wheel coil suspension, with triangulated four link rear, and panhard front linkage designs.
Fox Racing 2” Nitrogen charged shocks with remote reservoirs.
Front torsion bar based sway bar with adjustable and quick release links.
Heavy duty Johnny joints and .188” wall 2” O.D. equal length steel control arms.
Energy bump stops.
BRAKE SYSTEM
Common US parts based power assisted four-wheel vented disc brakes.
Dual diaphragm booster with GM style master cylinder.
Stainless steel system plumbing (hard and flex lines).
PARKING BRAKE
Isolated to rear brakes by shrouded stainless cable.
Floor actuated with dash warning light.
FUEL SYSTEM
Non-vented 10.6-gallon powder-coated black steel fuel tank.
Stainless steel system plumbing (hard and braided lines).
Large serviceable fuel filter, in-tank fuel pump.
Frame mounted fuel pressure regulator.
STEERING SYSTEM
Designed for mild power effect, and maximum control in all environments.
Lee Engineering Stage Four (4 rotations left to right) steering box.
13:1 to 16:1 mild variable ratio for safe high speed and low speed off-pavement control.
Nascar style alloy GM type II high efficiency pump with reservoir.
Single turn steering shaft with Borgenson joint.
3/4 ton lower steering arms and ends.
US made Teflon lined Heim joints.
Ididit designed custom tilt collapsible steering column.
Hellcat 16” steering wheel.
ELECTRICAL SYSTEM
Purpose built wiring harness, ignition and dash switches.
Triple seal connectors, cross-link wire, and in-cabin sealed fuse panel.
Isolated engine harness.
DOT legal LED headlights.
LED turn, tail, running and dash indicator lights.
90 AMP single wire alternator.
Integrated master kill switch.
Optima battery.
INSTRUMENTATION & DASH CONTROLS
Reliable American made Auto Meter gauges (MPH, RPM, oil pressure, fuel level, engine temperature and volts).
Submersible high beam floor switch.
Jewelry grade hand crafted CNC’ed stainless steel knurled, engraved and enameled dash knobs.
LED lights indicating turn signals, high beam, parking brake.
Three position illuminated locking differential control switch.
12 volt marine rated power port in dash.
Steel windshield frame latches allow for the windshield to be dropped to the hood for maximum clearance.
INTERIOR
Seating for four, with three point belts for all.
Polyurea floor surface coating.
Large hidden storage bin under passenger seat.
Standard seat surfaces finished in designer woven Chilewich marine rated UV stable vinyl.
Rear seat fits two passengers, and is removable.
Full Chrome Moly steel roll cage with integrated seat belt anchors and grab handles.
Removable alloy shade canopy (affixes to cage structure).
BODY
All-new steel body captures the original Willys character but with even greater longevity and resistance to the elements. The body is built by hand, and finished by hand by the leaders in replacement Jeep and Willys body parts for over four decades. The grill is designed and manufactured in California by ICON.
BODY SURFACE COATINGS
The ICON is finished in a Teflon polyester hybrid super durable Cardinal powder coat originally conceived for exterior industrial architectural uses then developed specifically for the ICON. Each panel is hand finished before assembly, then the underside of the main body and fenders plus inside floor surfaces are coated in a heat cured polyurea coating for reduction of vibration and heat transfer as well as the surface environment. All finished require minimal maintenance with Fantastic-or-409 / 50% water, never needs waxing and survives many a harsh trail.
The proprietary ICON finish is available in seven standard colors (custom color option available);
Rocky Mountain
Volcanic
Sand
Mayan Sun
Quartz
Spruce
Slate
Brick
All ICON CJ3B will feature Volcanic Black windshield frames, in the spirit of the original design.
WHEELS
BF Goodrich A/T or M/T 285/70/R17 tires with powder coated ProComp steel wheels (5).
BUMPERS
Front - Powder coated steel truss style with two D shackles. Integral pass through steel hawse fairlead.
Rear - Smittybilt with A frame custom tire carrier.
Here are the specs attached which i got from the company:
Navjit
Last edited by Jaggu : 22nd January 2010 at 10:00.
Reason: Back to back posts, please use Multi Quote instead, Thanks
|